EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Eco-Friendly Inorganic Binders: A Key Alternative for Reducing Harmful Emissions in Molding and Core-Making Technologies

Angelika Kmita iD, Rafał Dańko iD, Mariusz Holtzer iD, Józef Dańko, Dariusz Drożyński iD, Mateusz Skrzyński iD, Agnieszka Roczniak, Daniel Robert Gruszka iD, Jarosław Jakubski iD, Sara Tapola

International Journal of Molecular Sciences · 17.05.2024 · 25 (10) · 5496

DOI: 10.3390/ijms25105496 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Molecular Sciences, online erschienen am 17.05.2024. Verfasst von Angelika Kmita und 9 weiteren Autor:innen. Beteiligte Einrichtung: Academic Centre for Materials and Nanotechnology, AGH University of Krakow, A. Mickiewicza 30 St., 30-059 Krakow, Poland. Hauptthemen laut MEDLINE: Polycyclic Aromatic Hydrocarbons. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: GREEN CASTING LIFE project, co-funded by European Union's LIFE program., GREEN CASTING LIFE project, co-funded by National Fund for Environmental Protection and Water Management (NFOŚiGW), GREEN CASTING LIFE project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Many years of foundry practice and much more accurate analytical methods have shown that sands with organic binders, in addition to their many technological advantages, pose risks associated with the emission of many compounds, including harmful ones (e.g., formaldehyde, phenol, benzene, polycyclic aromatic hydrocarbons, and sulfur), arising during the pouring of liquid casting alloys into molds, their cooling, and knock-out. The aim of this research is to demonstrate the potential benefits of adopting inorganic binders in European iron foundries. This will improve the environmental and working conditions by introducing cleaner and more ecological production methods, while also ranking the tested binders studied in terms of their harmful content. The article pays special attention to the analysis of seven innovative inorganic binders and one organic binder, acting as a reference for emissions of gases from the BTEX (benzene, toluene, ethylbenzene, and xylenes) and PAHs (polycyclic aromatic hydrocarbons) groups and other compounds such as phenol, formaldehyde, and isocyanates (MDI and TDI) generated during the mold pouring process with liquid metals. The knowledge gained will, for the first time, enrich the database needed to update the Reference Document on The Best Available Techniques for the Smitheries and Foundries Industry (SF BREF).

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Polycyclic Aromatic HydrocarbonsInorganic ChemicalsMetallurgyFormaldehyde

Stichwörter der Autor:innen

green castinginorganic bindersreducing harmful emissionssustainable polymeric materials

Substanzen

Polycyclic Aromatic HydrocarbonsInorganic ChemicalsFormaldehyde

Autor:innen und Institutionen

  • Academic Centre for Materials and Nanotechnology, AGH University of Krakow, A. Mickiewicza 30 St., 30-059 Krakow, Poland.
  • Faculty of Foundry Engineering, AGH University of Krakow, A. Mickiewicza 30 St., 30-059 Krakow, Poland.
  • Meehanite Technology Oy, Kuokkamaantie 4, 33800 Tampere, Finland.

ORCID-Profile: Angelika Kmita, Rafał Dańko, Mariusz Holtzer, Dariusz Drożyński, Mateusz Skrzyński, Daniel Robert Gruszka, Jarosław Jakubski

Förderung

  • GREEN CASTING LIFE project, co-funded by European Union's LIFE program.
  • GREEN CASTING LIFE project, co-funded by National Fund for Environmental Protection and Water Management (NFOŚiGW)
  • GREEN CASTING LIFE project
  • the National Fund for Environmental Protection and Water Management (NFOŚiGW)

Zitieren

APA

Kmita, A., Dańko, R., Holtzer, M., Dańko, J., Drożyński, D., Skrzyński, M., Roczniak, A., Gruszka, D. R., Jakubski, J., & Tapola, S. (2024). Eco-Friendly Inorganic Binders: A Key Alternative for Reducing Harmful Emissions in Molding and Core-Making Technologies. International Journal of Molecular Sciences, 25(10), 5496. https://doi.org/10.3390/ijms25105496

Vancouver

Kmita A, Dańko R, Holtzer M, Dańko J, Drożyński D, Skrzyński M, et al. Eco-Friendly Inorganic Binders: A Key Alternative for Reducing Harmful Emissions in Molding and Core-Making Technologies. International Journal of Molecular Sciences. 2024;25(10):5496. doi:10.3390/ijms25105496

BibTeX
@article{Kmita2024,
  author = {Kmita, Angelika and Dańko, Rafał and Holtzer, Mariusz and Dańko, Józef and Drożyński, Dariusz and Skrzyński, Mateusz and Roczniak, Agnieszka and Gruszka, Daniel Robert and Jakubski, Jarosław and Tapola, Sara},
  title = {Eco-Friendly Inorganic Binders: A Key Alternative for Reducing Harmful Emissions in Molding and Core-Making Technologies},
  journal = {International Journal of Molecular Sciences},
  year = {2024},
  volume = {25},
  number = {10},
  pages = {5496},
  doi = {10.3390/ijms25105496}
}
Kostenlos starten →