EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Gelatin Enhances the Wet Mechanical Properties of Poly(D,L-Lactic Acid) Membranes

Deuk Yong Lee iD

International Journal of Molecular Sciences · 2024

DOI: 10.3390/ijms25095022 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2024. Verfasst von Deuk Yong Lee. Beteiligte Einrichtung: Department of Biomedical Engineering, Daelim University, Anyang 13916, Republic of Korea. Hauptthemen laut MEDLINE: Gelatin, Membranes, Artificial, Polyesters. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of SMEs and Startups (MSS, Republic of Korea).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biodegradable (BP) poly(D,L-lactic acid) (PDLLA) membranes are widely used in tissue engineering. Here, we investigate the effects of varying concentrations of PDLLA/gelatin membranes electrospun in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP; C3H2F6O) solvent on their mechanical and physical properties as well as their biocompatibility. Regardless of the environmental conditions, increasing the gelatin content resulted in elevated stress and reduced strain at membrane failure. There was a remarkable difference in strain-to-failure between dry and wet PDLLA/gelatin membranes, with wet strains consistently higher than those of the dry membranes because of the hydrophilic nature of gelatin. A similar wet strain (εw = 2.7–3.0) was observed in PDLLA/gelatin membranes with a gelatin content between 10 and 40%. Both dry and wet stresses increased with increasing gelatin content. The dry stress on PDLLA/gelatin membranes (σd = 6.7–9.7 MPa) consistently exceeded the wet stress (σw = 4.5–8.6 MPa). The water uptake capacity (WUC) improved, increasing from 57% to 624% with the addition of 40% gelatin to PDLLA. PDLLA/gelatin hybrid membranes containing 10 to 20 wt% gelatin exhibited favorable wet mechanical properties (σw = 5.4–6.3 MPa; εw = 2.9–3.0); WUC (337–571%), degradability (11.4–20.2%), and excellent biocompatibility.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

GelatinMembranes, ArtificialPolyestersBiocompatible MaterialsMaterials TestingStress, MechanicalTissue EngineeringWater

Stichwörter der Autor:innen

absorbable periodontal bone regenerationbiocompatibilityelectrospinninggelatinpoly(D,L-lactic acid) (PDLLA)wet mechanical properties

Substanzen

Biocompatible MaterialsGelatinMembranes, Artificialpoly(lactide)PolyestersWater

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Daelim University, Anyang 13916, Republic of Korea.
  • Department of R&D Center, Hass Co., Ltd., Gwangmyeong 14322, Republic of Korea.

ORCID-Profile: Deuk Yong Lee

Förderung

  • Ministry of SMEs and Startups (MSS, Republic of Korea)

Zitieren

APA

Lee, D. Y. (2024). Gelatin Enhances the Wet Mechanical Properties of Poly(D,L-Lactic Acid) Membranes. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms25095022

Vancouver

Lee DY. Gelatin Enhances the Wet Mechanical Properties of Poly(D,L-Lactic Acid) Membranes. International Journal of Molecular Sciences. 2024. doi:10.3390/ijms25095022

BibTeX
@article{Lee2024,
  author = {Lee, Deuk Yong},
  title = {Gelatin Enhances the Wet Mechanical Properties of Poly(D,L-Lactic Acid) Membranes},
  journal = {International Journal of Molecular Sciences},
  year = {2024},
  doi = {10.3390/ijms25095022}
}
Kostenlos starten →