EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Poly(propylene carbonate) on Properties of Polylactic Acid-Based Composite Films

Kang Chen, Xinyu Zhang, Zanru Wang, Ce Sun, Haiyan Tan, Yanhua Zhang iD

International Journal of Molecular Sciences · 2024

DOI: 10.3390/ijms25094730 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2024. Verfasst von Kang Chen und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Bio-Based Material Science and Technology, Northeast Forestry University, Ministry of Education, Harbin 150040, China. Hauptthemen laut MEDLINE: Polyesters, Tensile Strength. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enrich the properties of polylactic acid (PLA)-based composite films and improve the base degradability, in this study, a certain amount of poly(propylene carbonate) (PPC) was added to PLA-based composite films, and PLA/PPC-based composite films were prepared by melt blending and hot-press molding. The effects of the introduction of PPC on the composite films were analyzed through in-depth studies on mechanical properties, water vapor and oxygen transmission rates, thermal analysis, compost degradability, and bacterial inhibition properties of the composite films. When the introduction ratio coefficient of PPC was 30%, the tensile strength of the composite film increased by 19.68%, the water vapor transmission coefficient decreased by 14.43%, and the oxygen transmission coefficient decreased by 18.31% compared to that of the composite film without PPC, the cold crystallization temperature of the composite film increased gradually from 96.9 °C to 104.8 °C, and PPC improved the crystallization ability of composite film. The degradation rate of the composite film with PPC increased significantly compared to the previous one, and the degradation rate increased with the increase in the PPC content. The degradation rate was 49.85% and 46.22% faster on average than that of the composite film without PPC when the degradation was carried out over 40 and 80 days; the composite film had certain inhibition, and the maximum diameter of the inhibition circle was 2.42 cm. This study provides a strategy for the development of PLA-based biodegradable laminates, which can promote the application of PLA-based laminates in food packaging.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolyestersTensile StrengthPolypropylenesFood PackagingSteamPolymersAnti-Bacterial AgentsTemperaturePropane

Stichwörter der Autor:innen

composite filmdegradabilitypoly(propylene carbonate)polylactic acidthermal analysis

Substanzen

Polyesterspoly(lactide)Polypropylenespolypropylene carbonateSteampropylene carbonatePolymersAnti-Bacterial AgentsPropane

Autor:innen und Institutionen

  • Key Laboratory of Bio-Based Material Science and Technology, Northeast Forestry University, Ministry of Education, Harbin 150040, China.
  • School of Mechanical and Power Engineering, Harbin University of Science and Technology, Harbin 150080, China.

ORCID-Profile: Yanhua Zhang

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Chen, K., Zhang, X., Wang, Z., Sun, C., Tan, H., & Zhang, Y. (2024). Effect of Poly(propylene carbonate) on Properties of Polylactic Acid-Based Composite Films. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms25094730

Vancouver

Chen K, Zhang X, Wang Z, Sun C, Tan H, Zhang Y. Effect of Poly(propylene carbonate) on Properties of Polylactic Acid-Based Composite Films. International Journal of Molecular Sciences. 2024. doi:10.3390/ijms25094730

BibTeX
@article{Chen2024,
  author = {Chen, Kang and Zhang, Xinyu and Wang, Zanru and Sun, Ce and Tan, Haiyan and Zhang, Yanhua},
  title = {Effect of Poly(propylene carbonate) on Properties of Polylactic Acid-Based Composite Films},
  journal = {International Journal of Molecular Sciences},
  year = {2024},
  doi = {10.3390/ijms25094730}
}
Kostenlos starten →