Guar Gum as an Eco-Friendly Corrosion Inhibitor for N80 Carbon Steel under Sweet Environment in Saline Solution: Electrochemical, Surface, and Spectroscopic Studies
International Journal of Molecular Sciences · 31.07.2023 · 24 (15) · 12269
DOI: 10.3390/ijms241512269 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Molecular Sciences, online erschienen am 31.07.2023. Verfasst von Gaetano Palumbo und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry and Corrosion of Metals, Faculty of Foundry Engineering, AGH University of Science and Technology, al. Mickiewicza 30, PL-300…. Hauptthemen laut MEDLINE: Saline Solution, Steel. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Centre, Poland, AGH University of Science and Technology, Faculty of Foundry Engineering.
Abstract (Originalsprache)
In this study, the corrosion inhibition performance of the natural polysaccharide guar gum (GG) for N80 carbon steel in CO2-saturated saline solution at different temperatures and immersion times was investigated by weight loss and electrochemical measurements. The results have revealed that GG showed good inhibition performance at lower and higher temperatures. The inhibition efficiency observed via weight loss measurements reached 76.16 and 63.19% with 0.4 g L−1 of GG, at 25 and 50 °C, respectively. The inhibition efficiency of GG increased as the inhibitor concentration and immersion time increased but decreased with increasing temperature. EIS measurements have shown that, even after prolonged exposure, GG was still able to protect the metal surface. Potentiodynamic measurements showed the mixed-type nature of GG inhibitive action. The Temkin and Dubinin–Radushkevich adsorption isotherm models give accurate fitting of the estimated data, and the calculated parameters indicated that the adsorption of GG occurred mainly via an electrostatic or physical adsorption process. The associated activation energy (Ea) and the heat of adsorption (Qa) supported the physical adsorption nature of GG. FTIR analysis was used to explain the adsorption interaction between the inhibitor and the N80 carbon steel surface. SEM-EDS and AFM confirmed the adsorption of GG and the formation of an adsorptive layer of GG on the metal surface.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Chemistry and Corrosion of Metals, Faculty of Foundry Engineering, AGH University of Science and Technology, al. Mickiewicza 30, PL-30059 Krakow, Poland.
- Department of Cast Alloys and Composites Engineering, Faculty of Foundry Engineering, AGH University of Science and Technology, al. Mickiewicza 30, PL-30059 Krakow, Poland.
ORCID-Profile: Gaetano Palumbo, Dominika Święch, Marcin Górny
Förderung
- National Science Centre, Poland
- AGH University of Science and Technology, Faculty of Foundry Engineering
Zitieren
APA
Palumbo, G., Święch, D., & Górny, M. (2023). Guar Gum as an Eco-Friendly Corrosion Inhibitor for N80 Carbon Steel under Sweet Environment in Saline Solution: Electrochemical, Surface, and Spectroscopic Studies. International Journal of Molecular Sciences, 24(15), 12269. https://doi.org/10.3390/ijms241512269
Vancouver
Palumbo G, Święch D, Górny M. Guar Gum as an Eco-Friendly Corrosion Inhibitor for N80 Carbon Steel under Sweet Environment in Saline Solution: Electrochemical, Surface, and Spectroscopic Studies. International Journal of Molecular Sciences. 2023;24(15):12269. doi:10.3390/ijms241512269
BibTeX
@article{Palumbo2023,
author = {Palumbo, Gaetano and Święch, Dominika and Górny, Marcin},
title = {Guar Gum as an Eco-Friendly Corrosion Inhibitor for N80 Carbon Steel under Sweet Environment in Saline Solution: Electrochemical, Surface, and Spectroscopic Studies},
journal = {International Journal of Molecular Sciences},
year = {2023},
volume = {24},
number = {15},
pages = {12269},
doi = {10.3390/ijms241512269}
}
EUVIMED