Assessment of Electrospun Poly(ε-caprolactone) and Poly(lactic acid) Fiber Scaffolds to Generate 3D In Vitro Models of Colorectal Adenocarcinoma: A Preliminary Study
International Journal of Molecular Sciences · 2023
DOI: 10.3390/ijms24119443 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2023. Verfasst von Claudio Ricci und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil and Industrial Engineering, University of Pisa, Largo L. Lazzarino 2, 56126 Pisa, Italy. Hauptthemen laut MEDLINE: Adenocarcinoma, Colorectal Neoplasms. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Universities and Research, Italian Ministry of University and Research (MIUR).
Abstract (Originalsprache)
Three-dimensional scaffold-based culture has been increasingly gaining influence in oncology as a therapeutic strategy for tumors with a high relapse percentage. This study aims to evaluate electrospun poly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) scaffolds to create a 3D model of colorectal adenocarcinoma. Specifically, the physico-mechanical and morphological properties of PCL and PLA electrospun fiber meshes collected at different drum velocities, i.e., 500 rpm, 1000 rpm and 2500 rpm, were assessed. Fiber size, mesh porosity, pore size distribution, water contact angle and tensile mechanical properties were investigated. Caco-2 cells were cultured on the produced PCL and PLA scaffolds for 7 days, demonstrating good cell viability and metabolic activity in all the scaffolds. A cross-analysis of the cell–scaffold interactions with morphological, mechanical and surface characterizations of the different electrospun fiber meshes was carried out, showing an opposite trend of cell metabolic activity in PLA and PCL scaffolds regardless of the fiber alignment, which increased in PLA and decreased in PCL. The best samples for Caco-2 cell culture were PCL500 (randomly oriented fibers) and PLA2500 (aligned fibers). Caco-2 cells had the highest metabolic activity in these scaffolds, with Young’s moduli in the range of 8.6–21.9 MPa. PCL500 showed Young’s modulus and strain at break close to those of the large intestine. Advancements in 3D in vitro models of colorectal adenocarcinoma could move forward the development of therapies for this cancer.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Civil and Industrial Engineering, University of Pisa, Largo L. Lazzarino 2, 56126 Pisa, Italy.
- Centre for Instrumentation Sharing of University of Pisa (CISUP), Lungarno Pacinotti 43/44, 56126 Pisa, Italy.
ORCID-Profile: Luca Panariello, Meruyert Rustembek, Patrizia Cinelli, Mario Milazzo, Serena Danti, Andrea Lazzeri
Förderung
- Ministry of Education, Universities and Research
- Italian Ministry of University and Research (MIUR)
Zitieren
APA
Ricci, C., Azimi, B., Panariello, L., Antognoli, B., Cecchini, B., Rovelli, R., Rustembek, M., Cinelli, P., Milazzo, M., Danti, S., & Lazzeri, A. (2023). Assessment of Electrospun Poly(ε-caprolactone) and Poly(lactic acid) Fiber Scaffolds to Generate 3D In Vitro Models of Colorectal Adenocarcinoma: A Preliminary Study. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms24119443
Vancouver
Ricci C, Azimi B, Panariello L, Antognoli B, Cecchini B, Rovelli R, et al. Assessment of Electrospun Poly(ε-caprolactone) and Poly(lactic acid) Fiber Scaffolds to Generate 3D In Vitro Models of Colorectal Adenocarcinoma: A Preliminary Study. International Journal of Molecular Sciences. 2023. doi:10.3390/ijms24119443
BibTeX
@article{Ricci2023,
author = {Ricci, Claudio and Azimi, Bahareh and Panariello, Luca and Antognoli, Benedetta and Cecchini, Beatrice and Rovelli, Roberta and Rustembek, Meruyert and Cinelli, Patrizia and Milazzo, Mario and Danti, Serena and Lazzeri, Andrea},
title = {Assessment of Electrospun Poly(ε-caprolactone) and Poly(lactic acid) Fiber Scaffolds to Generate 3D In Vitro Models of Colorectal Adenocarcinoma: A Preliminary Study},
journal = {International Journal of Molecular Sciences},
year = {2023},
doi = {10.3390/ijms24119443}
}
EUVIMED