Tough Bioplastics from Babassu Oil-Based Acrylic Monomer, Hemicellulose Xylan, and Carnauba Wax
International Journal of Molecular Sciences · 2023
DOI: 10.3390/ijms24076103 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2023. Verfasst von Yehor Polunin und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Coatings and Polymeric Materials, North Dakota State University, Fargo, ND 58105, USA. Hauptthemen laut MEDLINE: Xylans, Polyethylene. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, Sonoco FRESH Initiative, North Dakota Department of Agriculture.
Abstract (Originalsprache)
We describe here the fabrication, characterization, and properties of tough bioplastics made of a babassu oil-based acrylic polymer (PBBM), hemicellulose xylan grafted with PBBM chains, and carnauba wax (CW). The plastic was primarily designed to obtain bioderived materials that can replace low-density polyethylene (LDPE) in certain food packaging applications. To obtain plastic, the radical polymerization of an original babassu oil-based acrylic monomer (BBM) in the presence of xylan macromolecules modified with maleic anhydride (X-MA) was conducted. The polymerization resulted in a material (PBBM-X) mostly consisting of highly branched PBBM/X-MA macromolecules. PBBM-X has a glass transition of 42 °C, a storage modulus of 130 MPa (at 25 °C, RT), and a Young’s modulus of 30 MPa at RT. To increase the moduli, we blended PBBM-X with carnauba wax, a natural material with a high modulus and a melting temperature of ~80 °C. It was found that PBBM-X is compatible with the wax, as evidenced by the alternation of the material’s thermal transitions and the co-crystallization of BBM side alkyl fragments with CW. As a result, the PBBM-X/CW blend containing 40% of the wax had a storage modulus of 475 MPa (RT) and a Young’s modulus of 248 MPa (RT), which is close to that of LDPE. As polyethylene, the PBBM-X and PBBM-X/CW bioplastics have the typical stress-strain behavior demonstrated by ductile (tough) plastics. However, the bioplastic’s yield strength and elongation-at-yield are considerably lower than those of LDPE. We evaluated the moisture barrier properties of the PBBM-X/(40%)CW material and found that the bioplastic’s water vapor permeability (WVP) is quite close to that of LDPE. Our bioderived material demonstrates a WVP that is comparable to polyethylene terephthalate and lower than the WVP of nylon and polystyrene. Taking into account the obtained results, the fabricated materials can be considered as polyethylene alternatives to provide sustainability in plastics production in the packaging areas where LDPE currently dominates.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Coatings and Polymeric Materials, North Dakota State University, Fargo, ND 58105, USA.
- Department of Materials Science and Engineering, Clemson University, Clemson, SC 29634, USA.
- Nanostructured Materials Laboratory, University of Georgia, Athens, GA 30602, USA.
ORCID-Profile: Liying Wei, Sergiy Minko, Igor Luzinov, Andriy Voronov
Förderung
- National Science Foundation
- Sonoco FRESH Initiative
- North Dakota Department of Agriculture
Zitieren
APA
Polunin, Y., Kirianchuk, V., Mhesn, N., Wei, L., Minko, S., Luzinov, I., & Voronov, A. (2023). Tough Bioplastics from Babassu Oil-Based Acrylic Monomer, Hemicellulose Xylan, and Carnauba Wax. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms24076103
Vancouver
Polunin Y, Kirianchuk V, Mhesn N, Wei L, Minko S, Luzinov I, et al. Tough Bioplastics from Babassu Oil-Based Acrylic Monomer, Hemicellulose Xylan, and Carnauba Wax. International Journal of Molecular Sciences. 2023. doi:10.3390/ijms24076103
BibTeX
@article{Polunin2023,
author = {Polunin, Yehor and Kirianchuk, Vasylyna and Mhesn, Najah and Wei, Liying and Minko, Sergiy and Luzinov, Igor and Voronov, Andriy},
title = {Tough Bioplastics from Babassu Oil-Based Acrylic Monomer, Hemicellulose Xylan, and Carnauba Wax},
journal = {International Journal of Molecular Sciences},
year = {2023},
doi = {10.3390/ijms24076103}
}
EUVIMED