EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural and Mechanical Characterization of Al Nanocomposites Using GCNs as a Reinforcement Fabricated by Induction Sintering

Verónica Gallegos Orozco, Audel Santos Beltrán, Miriam Santos Beltrán, Hansel Medrano Prieto, Carmen Gallegos Orozco, Ivanovich Estrada Guel iD, Roberto Martínez Sánchez iD, José Manuel Mendoza Duarte

International Journal of Molecular Sciences · 2023

DOI: 10.3390/ijms24065558 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2023. Verfasst von Verónica Gallegos Orozco und 7 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Nanotecnología, Universidad Tecnológica de Chihuahua Sur, Km. 3.5 Carr. Chihuahua a Aldama, Chihuahua 31313, Mexico. Hauptthemen laut MEDLINE: Nanocomposites, Graphite. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-energy ball milling is a process suitable for producing composite powders whose achieved microstructure can be controlled by the processing parameters. Through this technique, it is possible to obtain a homogeneous distribution of reinforced material into a ductile metal matrix. In this work, some Al/CGNs nanocomposites were fabricated through a high-energy ball mill to disperse nanostructured graphite reinforcements produced in situ in the Al matrix. To retain the dispersed CGNs in the Al matrix, avoiding the precipitation of the Al4C3 phase during sintering, the high-frequency induction sintering (HFIS) method was used, which allows rapid heating rates. For comparative purposes, samples in the green and sintered state processed in a conventional electric furnace (CFS) were used. Microhardness testing was used to evaluate the effectiveness of the reinforcement in samples under different processing conditions. Structural analyses were carried out through an X-ray diffractometer coupled with a convolutional multiple whole profile (CMWP) fitting program to determine the crystallite size and dislocation density; both strengthening contributions were calculated using the Langford–Cohen and Taylor equations. According to the results, the CGNs dispersed in the Al matrix played an important role in the reinforcement of the Al matrix, promoting the increase in the dislocation density during the milling process. The strengthening contribution of the dislocation density was ~50% of the total hardening value, while the contribution by dispersion of CGNs was ~22% in samples with 3 wt. % C and sintered by the HFIS method. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used to analyze the morphology, size, and distribution of phases present in the Al matrix. From the analyses carried out in AFM (topography and phase images), the CGNs are located mainly around crystallites and present height profiles of 1.6 to 2 nm.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

NanocompositesGraphiteElectricityMicroscopy, Atomic ForceHot Temperature

Stichwörter der Autor:innen

carbon nanostructuresmechanical propertiesmetal matrix compositesstrengthening mechanismstructural analyses

Substanzen

Graphite

Autor:innen und Institutionen

  • Departamento de Nanotecnología, Universidad Tecnológica de Chihuahua Sur, Km. 3.5 Carr. Chihuahua a Aldama, Chihuahua 31313, Mexico.
  • Departamento de Ciencias Básicas, Tecnológico Nacional de México, Campus Chihuahua II, Ave. de las Industrias #11101, Complejo Industrial Chihuahua, Chihuahua 31130, Mexico.
  • Centro de Investigación en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnología, Miguel de Cervantes No. 120, Chihuahua 31136, Mexico.

ORCID-Profile: Ivanovich Estrada Guel, Roberto Martínez Sánchez

Zitieren

APA

Orozco, V. G., Beltrán, A. S., Beltrán, M. S., Prieto, H. M., Orozco, C. G., Guel, I. E., Sánchez, R. M., & Duarte, J. M. M. (2023). Microstructural and Mechanical Characterization of Al Nanocomposites Using GCNs as a Reinforcement Fabricated by Induction Sintering. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms24065558

Vancouver

Orozco VG, Beltrán AS, Beltrán MS, Prieto HM, Orozco CG, Guel IE, et al. Microstructural and Mechanical Characterization of Al Nanocomposites Using GCNs as a Reinforcement Fabricated by Induction Sintering. International Journal of Molecular Sciences. 2023. doi:10.3390/ijms24065558

BibTeX
@article{Orozco2023,
  author = {Orozco, Verónica Gallegos and Beltrán, Audel Santos and Beltrán, Miriam Santos and Prieto, Hansel Medrano and Orozco, Carmen Gallegos and Guel, Ivanovich Estrada and Sánchez, Roberto Martínez and Duarte, José Manuel Mendoza},
  title = {Microstructural and Mechanical Characterization of Al Nanocomposites Using GCNs as a Reinforcement Fabricated by Induction Sintering},
  journal = {International Journal of Molecular Sciences},
  year = {2023},
  doi = {10.3390/ijms24065558}
}
Kostenlos starten →