EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Highly Efficient Cationic Polymerization of β-Pinene, a Bio-Based, Renewable Olefin, with TiCl4 Catalyst from Cryogenic to Energy-Saving Room Temperature Conditions

Klára Verebélyi iD, Ákos Szabó, Zsombor Réti, Györgyi Szarka, Ákos Villányi, Béla Iván iD

International Journal of Molecular Sciences · 2023

DOI: 10.3390/ijms24065170 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2023. Verfasst von Klára Verebélyi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Polymer Chemistry and Physics Research Group, Institute of Materials and Environmental Chemistry, Research Centre for Natural Sciences, Magyar Tudóso…. Hauptthemen laut MEDLINE: Alkenes, Polymers. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 97 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State of Hungary, co-financed by the European Regional Development Fund, National Research, Development and Innovation Office, Hungary.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymers based on renewable monomers are projected to have a significant role in the sustainable economy, even in the near future. Undoubtedly, the cationically polymerizable β-pinene, available in considerable quantities, is one of the most promising bio-based monomers for such purposes. In the course of our systematic investigations related to the catalytic activity of TiCl4 on the cationic polymerization of this natural olefin, it was found that the 2-chloro-2,4,4-trimethylpentane (TMPCl)/TiCl4/N,N,N′,N′-tetramethylethylenediamine (TMEDA) initiating system induced efficient polymerization in dichloromethane (DCM)/hexane (Hx) mixture at both −78 °C and room temperature. At −78 °C, 100% monomer conversion was observed within 40 min, resulting in poly(β-pinene) with relatively high Mn (5500 g/mol). The molecular weight distributions (MWD) were uniformly shifted towards higher molecular weights (MW) in these polymerizations as long as monomer was present in the reaction mixture. However, chain–chain coupling took place after reaching 100% conversion, i.e., under monomer-starved conditions, resulting in considerable molecular weight increase and MWD broadening at −78 °C. At room temperature, the polymerization rate was lower, but chain coupling did not occur. The addition of a second feed of monomer in the polymerization system led to increasing conversion and polymers with higher MWs at both temperatures. 1H NMR spectra of the formed polymers indicated high in-chain double-bond contents. To overcome the polarity decrease by raising the temperature, polymerizations were also carried out in pure DCM at room temperature and at −20 °C. In both cases, rapid polymerization occurred with nearly quantitative yields, leading to poly(β-pinene)s with Mns in the range of 2000 g/mol. Strikingly, polymerization by TiCl4 alone, i.e., without any additive, also occurred with near complete conversion at room temperature within a few minutes, attributed to initiation by adventitious protic impurities. These results convincingly prove that highly efficient carbocationic polymerization of the renewable β-pinene can be accomplished with TiCl4 as catalyst under both cryogenic conditions, applied widely for carbocationic polymerizations, and the environmentally benign, energy-saving room temperature, i.e., without any additive and cooling or heating. These findings enable TiCl4-catalyzed eco-friendly manufacturing of poly(β-pinene)s, which can be utilized in various applications, and in addition, subsequent derivatizations could result in a range of high-added-value products.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AlkenesPolymersTemperaturePolymerizationCatalysisBicyclic Monoterpenes

Stichwörter der Autor:innen

TiCl4 catalystbio-basedcationic polymerizationchain-chain couplingeco-friendlyenvironmentally advantageouspoly(β-pinene)renewableroom temperature polymerizationβ-pinene

Substanzen

AlkenesPolymersbeta-pineneBicyclic Monoterpenes

Autor:innen und Institutionen

  • Polymer Chemistry and Physics Research Group, Institute of Materials and Environmental Chemistry, Research Centre for Natural Sciences, Magyar Tudósok Krt 2, H-1117 Budapest, Hungary.

ORCID-Profile: Klára Verebélyi, Béla Iván

Förderung

  • State of Hungary, co-financed by the European Regional Development Fund
  • National Research, Development and Innovation Office, Hungary

Zitieren

APA

Verebélyi, K., Szabó, Á., Réti, Z., Szarka, G., Villányi, Á., & Iván, B. (2023). Highly Efficient Cationic Polymerization of β-Pinene, a Bio-Based, Renewable Olefin, with TiCl4 Catalyst from Cryogenic to Energy-Saving Room Temperature Conditions. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms24065170

Vancouver

Verebélyi K, Szabó Á, Réti Z, Szarka G, Villányi Á, Iván B. Highly Efficient Cationic Polymerization of β-Pinene, a Bio-Based, Renewable Olefin, with TiCl4 Catalyst from Cryogenic to Energy-Saving Room Temperature Conditions. International Journal of Molecular Sciences. 2023. doi:10.3390/ijms24065170

BibTeX
@article{Vereblyi2023,
  author = {Verebélyi, Klára and Szabó, Ákos and Réti, Zsombor and Szarka, Györgyi and Villányi, Ákos and Iván, Béla},
  title = {Highly Efficient Cationic Polymerization of β-Pinene, a Bio-Based, Renewable Olefin, with TiCl4 Catalyst from Cryogenic to Energy-Saving Room Temperature Conditions},
  journal = {International Journal of Molecular Sciences},
  year = {2023},
  doi = {10.3390/ijms24065170}
}
Kostenlos starten →