Fabrication of Silane-Grafted Cellulose Nanocrystals and Their Effects on the Structural, Thermal, Mechanical, and Hysteretic Behavior of Thermoplastic Polyurethane
International Journal of Molecular Sciences · 06.03.2023 · 24 (5) · 5036
DOI: 10.3390/ijms24055036 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Molecular Sciences, online erschienen am 06.03.2023. Verfasst von Xuenan Sun und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China. Hauptthemen laut MEDLINE: Polyurethanes, Nanoparticles. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Foundation of Science Research Program from the Hubei Provincial Department of Education.
Abstract (Originalsprache)
Reinforcement of polymer nanocomposites can be achieved by the selection of the appropriate fabrication method, surface modification, and orientation of the filler. Herein, we present a nonsolvent-induced phase separation method with ternary solvents to prepare thermoplastic polyurethane (TPU) composite films with excellent mechanical properties using 3-Glycidyloxypropyltrimethoxysilane-modified cellulose nanocrystals (GLCNCs). ATR-IR and SEM analyses of the GLCNCs confirmed that GL was successfully coated on the surface of the nanocrystals. The incorporation of GLCNCs in TPU resulted in the enhancement of the tensile strain and toughness of pure TPU owing to the enhanced interfacial interactions between them. The GLCNC–TPU composite film had tensile strain and toughness values of 1740.42% and 90.01 MJ/m3, respectively. Additionally, GLCNC–TPU exhibited a good elastic recovery rate. CNCs were readily aligned along the fiber axis after the spinning and drawing of the composites into fibers, which further improved the mechanical properties of the composites. The stress, strain, and toughness of the GLCNC–TPU composite fiber increased by 72.60%, 10.25%, and 103.61%, respectively, compared to those of the pure TPU film. This study demonstrates a facile and effective strategy for fabricating mechanically enhanced TPU composites.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory of New Textile Materials and Advanced Processing Technologies, Wuhan Textile University, Wuhan 430200, China.
- College of Material Science and Engineering, Wuhan Textile University, Wuhan 430200, China.
- Institute for Frontier Materials, Deakin University, Geelong, VIC 3216, Australia.
ORCID-Profile: Liangjun Xia
Förderung
- National Natural Science Foundation of China
- Foundation of Science Research Program from the Hubei Provincial Department of Education
Zitieren
APA
Sun, X., Yang, X., Zhang, J., Shang, B., Lyu, P., Zhang, C., Liu, X., & Xia, L. (2023). Fabrication of Silane-Grafted Cellulose Nanocrystals and Their Effects on the Structural, Thermal, Mechanical, and Hysteretic Behavior of Thermoplastic Polyurethane. International Journal of Molecular Sciences, 24(5), 5036. https://doi.org/10.3390/ijms24055036
Vancouver
Sun X, Yang X, Zhang J, Shang B, Lyu P, Zhang C, et al. Fabrication of Silane-Grafted Cellulose Nanocrystals and Their Effects on the Structural, Thermal, Mechanical, and Hysteretic Behavior of Thermoplastic Polyurethane. International Journal of Molecular Sciences. 2023;24(5):5036. doi:10.3390/ijms24055036
BibTeX
@article{Sun2023,
author = {Sun, Xuenan and Yang, Xinze and Zhang, Jiajing and Shang, Bin and Lyu, Pei and Zhang, Chunhua and Liu, Xin and Xia, Liangjun},
title = {Fabrication of Silane-Grafted Cellulose Nanocrystals and Their Effects on the Structural, Thermal, Mechanical, and Hysteretic Behavior of Thermoplastic Polyurethane},
journal = {International Journal of Molecular Sciences},
year = {2023},
volume = {24},
number = {5},
pages = {5036},
doi = {10.3390/ijms24055036}
}
EUVIMED