Significance of MnO2 Type and Solution Parameters in Manganese Removal from Water Solution
International Journal of Molecular Sciences · 2023
DOI: 10.3390/ijms24054448 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2023. Verfasst von Magdalena M Michel und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Environmental Engineering, Warsaw University of Life Science, 02-787 Warsaw, Poland. Hauptthemen laut MEDLINE: Oxides, Manganese. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Center, Narodowe Centrum Nauki (Polish National Science Centre).
Abstract (Originalsprache)
A very low concentration of manganese (Mn) in water is a critical issue for municipal and industrial water supply systems. Mn removal technology is based on the use of manganese oxides (MnOx), especially manganese dioxide (MnO2) polymorphs, under different conditions of pH and ionic strength (water salinity). The statistical significance of the impact of polymorph type (akhtenskite ε-MnO2, birnessite δ-MnO2, cryptomelane α-MnO2 and pyrolusite β-MnO2), pH (2–9) and ionic strength (1–50 mmol/L) of solution on the adsorption level of Mn was investigated. The analysis of variance and the non-parametric Kruskal–Wallis H test were applied. Before and after Mn adsorption, the tested polymorphs were characterized using X-ray diffraction, scanning electron microscope techniques and gas porosimetry analysis. Here we demonstrated the significant differences in adsorption level between MnO2 polymorphs’ type and pH; however, the statistical analysis proves that the type of MnO2 has a four times stronger influence. There was no statistical significance for the ionic strength parameter. We showed that the high adsorption of Mn on the poorly crystalline polymorphs leads to the blockage of micropores in akhtenskite and, contrary, causes the development of the surface structure of birnessite. At the same time, no changes in the surfaces of cryptomelane and pyrolusite, the highly crystalline polymorphs, were found due to the very small loading by the adsorbate.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Institute of Environmental Engineering, Warsaw University of Life Science, 02-787 Warsaw, Poland.
- Institute of Materials Engineering, University of Rzeszow, 35-310 Rzeszow, Poland.
- Department of Inorganic and Analytical Chemistry, Faculty of Chemistry, Rzeszow University of Technology, 35-959 Rzeszow, Poland.
ORCID-Profile: Magdalena M Michel, Mostafa Azizi, Bogumił Cieniek, Eleonora Sočo
Förderung
- National Science Center
- Narodowe Centrum Nauki (Polish National Science Centre)
Zitieren
APA
Michel, M. M., Azizi, M., Mirosław-Świątek, D., Reczek, L., Cieniek, B., & Sočo, E. (2023). Significance of MnO2 Type and Solution Parameters in Manganese Removal from Water Solution. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms24054448
Vancouver
Michel MM, Azizi M, Mirosław-Świątek D, Reczek L, Cieniek B, Sočo E. Significance of MnO2 Type and Solution Parameters in Manganese Removal from Water Solution. International Journal of Molecular Sciences. 2023. doi:10.3390/ijms24054448
BibTeX
@article{Michel2023,
author = {Michel, Magdalena M and Azizi, Mostafa and Mirosław-Świątek, Dorota and Reczek, Lidia and Cieniek, Bogumił and Sočo, Eleonora},
title = {Significance of MnO2 Type and Solution Parameters in Manganese Removal from Water Solution},
journal = {International Journal of Molecular Sciences},
year = {2023},
doi = {10.3390/ijms24054448}
}
EUVIMED