EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermo-Electro-Chemo-Mechanical Coupled Modeling of Solid Oxide Fuel Cell with LSCF-GDC Composite Cathode

Weiqiang Cai, Qingrong Zheng, Jinliang Yuan iD, Wanneng Yu, Zibin Yin, Yu Wu, Zhonggang Zhang iD

International Journal of Molecular Sciences · 18.02.2023 · 24 (4) · 4137

DOI: 10.3390/ijms24044137 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Molecular Sciences, online erschienen am 18.02.2023. Verfasst von Weiqiang Cai und 6 weiteren Autor:innen. Beteiligte Einrichtung: Marine Engineering Institute, Jimei University, Xiamen 361021, China. Hauptthemen laut MEDLINE: Oxides, Methanol. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Fujian Province, Foundation of Tan Kah Kee Innovation Laboratory.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Intricate relationships between transport phenomena, reaction mechanisms, and mechanical aspects likely affect the durability of solid oxide fuel cell (SOFC) stack. This study presents a modeling framework that combines thermo-electro-chemo models (including the methanol conversion process and the electrochemical reactions of the carbon monoxide as well as the hydrogen) and a contact thermo-mechanical model that considers the effective mechanical properties of composite electrode material. Detailed parametric studies are performed focusing on the inlet fuel species (hydrogen, methanol syngas) and flow arrangements (co-flow, counter-flow) under typical operating conditions (operating voltage 0.7 V), and performance indicators of the cell, such as the high-temperature zone, current density, and maximum thermal stress were discussed for parameter optimization. The simulated results show that the high temperature zone of the hydrogen-fueled SOFC is located at the central part of units 5, 6, and 7, and the maximum value is about 40 K higher than that of methanol syngas-fueled SOFC. The charge transfer reactions can occur throughout the cathode layer. The counter-flow improves the trend of the current density distribution of hydrogen-fueled SOFC, while the effect on the current density distribution of methanol syngas-fueled SOFC is small. The distribution characteristics of the stress field within SOFC are extremely complex, and the inhomogeneity of the stress field distribution can be effectively improved by feeding methanol syngas. The counter-flow improves the stress distribution state of the electrolyte layer of methanol syngas-fueled SOFC, and the maximum tensile stress value is reduced by about 37.7%.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

OxidesMethanolHydrogenWaterElectrodes

Stichwörter der Autor:innen

methanol syngasnumerical analysissolid oxide fuel cellthermal stresstransport phenomena

Substanzen

OxidesMethanolHydrogenWater

Autor:innen und Institutionen

  • Marine Engineering Institute, Jimei University, Xiamen 361021, China.
  • Fujian Provincial Key Laboratory of Naval Architecture and Ocean Engineering, Xiamen 361021, China.
  • Faculty of Maritime and Transportation, Ningbo University, Ningbo 315832, China.
  • Shanghai Engineering Research Center of Hadal Science and Technology, College of Engineering Science and Technology, Shanghai Ocean University, Shanghai 201306, China.

ORCID-Profile: Jinliang Yuan, Zhonggang Zhang

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Fujian Province
  • Foundation of Tan Kah Kee Innovation Laboratory

Zitieren

APA

Cai, W., Zheng, Q., Yuan, J., Yu, W., Yin, Z., Wu, Y., & Zhang, Z. (2023). Thermo-Electro-Chemo-Mechanical Coupled Modeling of Solid Oxide Fuel Cell with LSCF-GDC Composite Cathode. International Journal of Molecular Sciences, 24(4), 4137. https://doi.org/10.3390/ijms24044137

Vancouver

Cai W, Zheng Q, Yuan J, Yu W, Yin Z, Wu Y, et al. Thermo-Electro-Chemo-Mechanical Coupled Modeling of Solid Oxide Fuel Cell with LSCF-GDC Composite Cathode. International Journal of Molecular Sciences. 2023;24(4):4137. doi:10.3390/ijms24044137

BibTeX
@article{Cai2023,
  author = {Cai, Weiqiang and Zheng, Qingrong and Yuan, Jinliang and Yu, Wanneng and Yin, Zibin and Wu, Yu and Zhang, Zhonggang},
  title = {Thermo-Electro-Chemo-Mechanical Coupled Modeling of Solid Oxide Fuel Cell with LSCF-GDC Composite Cathode},
  journal = {International Journal of Molecular Sciences},
  year = {2023},
  volume = {24},
  number = {4},
  pages = {4137},
  doi = {10.3390/ijms24044137}
}
Kostenlos starten →