EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Characterization of Gelatin-Agarose and Gelatin-Starch Blends Using Alkaline Solvent

Oleksandra Dzeikala iD, Miroslawa Prochon iD, Anna Marzec, Szymon Szczepanik iD

International Journal of Molecular Sciences · 2023

DOI: 10.3390/ijms24021473 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2023. Verfasst von Oleksandra Dzeikala und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Polymer and Dye Technology, Faculty of Chemistry, Lodz University of Technology, Stefanowskiego 16, 90-537 Lodz, Poland. Hauptthemen laut MEDLINE: Starch, Gelatin. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Lodz University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plastic waste is a serious problem in modern society. Every day, mankind produces tons of waste that must be disposed of or recycled. The most common types of plastic waste are disposable tableware, bags, packaging, bottles, and containers, and not all are recycled. Therefore, there is a great interest in producing environmentally friendly disposable materials. In this study, modified gelatin blends using polysaccharides (e.g., agarose, starch) were produced to obtain a stable coating. Various techniques were used to characterize the obtained bioplastics, including FTIR spectroscopy (Fourier-transform infrared spectroscopy), TGA (thermogravimetric analysis)/DSC (differential scanning calorimetry), contact angle measurements, and surface energy characterization. We also investigated the influence of thermal and microbiological degradation on the properties of the biocomposite. The addition of agarose increased the hardness of the blend by 27% compared to the control sample without added polysaccharides. Increases were also observed in the surface energy (24%), softening point (15%), and glass transition temperature (14%) compared to the control sample. The addition of starch to the biopolymer increased the softening point by 15% and the glass transition temperature by 6%. After aging, both blends showed an increase in hardness of 26% and a decrease in tensile strength of 60%.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

StarchGelatinSepharoseSolventsPolysaccharidesPlasticsSpectroscopy, Fourier Transform Infrared

Stichwörter der Autor:innen

agarosebiocompositesbiodegradationbiopolymerscollagenic proteinsgelatinpolysaccharidesstarch

Substanzen

StarchGelatinSepharoseSolventsPolysaccharidesPlastics

Autor:innen und Institutionen

  • Institute of Polymer and Dye Technology, Faculty of Chemistry, Lodz University of Technology, Stefanowskiego 16, 90-537 Lodz, Poland.

ORCID-Profile: Oleksandra Dzeikala, Miroslawa Prochon, Szymon Szczepanik

Förderung

  • Lodz University of Technology

Zitieren

APA

Dzeikala, O., Prochon, M., Marzec, A., & Szczepanik, S. (2023). Preparation and Characterization of Gelatin-Agarose and Gelatin-Starch Blends Using Alkaline Solvent. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms24021473

Vancouver

Dzeikala O, Prochon M, Marzec A, Szczepanik S. Preparation and Characterization of Gelatin-Agarose and Gelatin-Starch Blends Using Alkaline Solvent. International Journal of Molecular Sciences. 2023. doi:10.3390/ijms24021473

BibTeX
@article{Dzeikala2023,
  author = {Dzeikala, Oleksandra and Prochon, Miroslawa and Marzec, Anna and Szczepanik, Szymon},
  title = {Preparation and Characterization of Gelatin-Agarose and Gelatin-Starch Blends Using Alkaline Solvent},
  journal = {International Journal of Molecular Sciences},
  year = {2023},
  doi = {10.3390/ijms24021473}
}
Kostenlos starten →