EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Managing Nanomaterials in the Workplace by Using the Control Banding Approach

Delfina Ramos iD, Luis Almeida iD

International Journal of Environmental Research and Public Health · 31.05.2023 · 20 (11) · 6011

DOI: 10.3390/ijerph20116011 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift International Journal of Environmental Research and Public Health, online erschienen am 31.05.2023. Verfasst von Delfina Ramos und 1 weiteren Autor:innen. Beteiligte Einrichtung: ISEP-School of Engineering, Polytechnic of Porto, 4249-015 Porto, Portugal. Hauptthemen laut MEDLINE: Nanostructures, Occupational Exposure, Occupational Health. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nanomaterials offer new technical and commercial opportunities. However, they may also pose risks to consumers and the environment and raise concerns about occupational health and safety. An overview of the standardization in the area of nanomaterials is presented. Focus is given to the standard ISO/TS 12901-2:2014, which describes the use of a control banding approach for controlling the risks associated with occupational exposures to nano-objects and their aggregates and agglomerates greater than 100 nm. The article also presents a case study on a textile finishing company that implements two chemical finishes containing nanomaterials. A risk analysis was conducted to assess the hazards associated with workers handling nanomaterials. Control banding was applied, and measures such as appropriate ventilation and use of protective equipment are proposed to mitigate risks. In some cases, additional measures, such as a closed booth and smoke extractor, are required. The safety data sheets are a primary source of information on how to handle and care for products containing nanomaterials, but the information provided is still limited in terms of the specific hazards and risks posed by nanomaterials.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

NanostructuresOccupational ExposureOccupational HealthHumansRisk AssessmentWorkplace

Stichwörter der Autor:innen

control bandingnanomaterialsoccupational health and safetyrisk managementstandardizationtextiles

Autor:innen und Institutionen

  • ISEP-School of Engineering, Polytechnic of Porto, 4249-015 Porto, Portugal.
  • Associate Laboratory for Energy, Transports and Aerospace (LAETA-INEGI), Rua Dr. Roberto Frias 400, 4200-465 Porto, Portugal.
  • Algoritmi Research Centre/LASI, School of Engineering, University of Minho, 4800-058 Guimarães, Portugal.
  • Department of Textile Engineering, University of Minho, 4800-058 Guimarães, Portugal.

ORCID-Profile: Delfina Ramos, Luis Almeida

Zitieren

APA

Ramos, D., & Almeida, L. (2023). Managing Nanomaterials in the Workplace by Using the Control Banding Approach. International Journal of Environmental Research and Public Health, 20(11), 6011. https://doi.org/10.3390/ijerph20116011

Vancouver

Ramos D, Almeida L. Managing Nanomaterials in the Workplace by Using the Control Banding Approach. International Journal of Environmental Research and Public Health. 2023;20(11):6011. doi:10.3390/ijerph20116011

BibTeX
@article{Ramos2023,
  author = {Ramos, Delfina and Almeida, Luis},
  title = {Managing Nanomaterials in the Workplace by Using the Control Banding Approach},
  journal = {International Journal of Environmental Research and Public Health},
  year = {2023},
  volume = {20},
  number = {11},
  pages = {6011},
  doi = {10.3390/ijerph20116011}
}
Kostenlos starten →