Effect of Membrane Pore Size on Membrane Fouling of Corundum Ceramic Membrane in MBR
International Journal of Environmental Research and Public Health · 04.03.2023 · 20 (5) · 4558
DOI: 10.3390/ijerph20054558 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Environmental Research and Public Health, online erschienen am 04.03.2023. Verfasst von Rui Huang und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Transportation Engineering, Hebei University of Technology, Tianjin 300401, China. Hauptthemen laut MEDLINE: Membranes, Artificial, Microbiota. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Tianjin City, China, Natural Science Foundation of Hebei Province, China.
Abstract (Originalsprache)
Ceramic membrane has emerged as a promising material to address the membrane fouling issue in membrane bioreactors (MBR). In order to optimize the structural property of ceramic membrane, four corundum ceramic membranes with the mean pore size of 0.50, 0.63, 0.80, and 1.02 μm were prepared, which were designated as C5, C7, C13, and C20, respectively. Long-term MBR experiments showed that the C7 membrane with medium pore size experienced the lowest trans-membrane pressure development rate. Both the decrease and increase of membrane pore size would lead to more severe membrane fouling in the MBR. It was also interesting that with the increase of membrane pore size, the relative proportion of cake layer resistance in total fouling resistance was gradually increased. The content of dissolved organic foulants (i.e., protein, polysaccharide and DOC) on the surface of C7 was quantified as the lowest among the different ceramic membranes. Microbial community analysis also revealed the C7 had a lower relative abundance of membrane fouling associated bacteria in its cake layer. The results clearly demonstrated that ceramic membrane fouling in MBR could be effectively alleviated through optimizing the membrane pore size, which was a key structural factor for preparation of ceramic membrane.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Civil and Transportation Engineering, Hebei University of Technology, Tianjin 300401, China.
- Guangdong GDH Water Co., Ltd., Shenzhen 518021, China.
- School of Environment, Harbin Institute of Technology, Harbin 150090, China.
- State Key Laboratory of Eco-Hydraulics in Northwest Arid Region, Xi'an University of Technology, Xi'an 710048, China.
- Shanghai Hanyuan Engineering & Technology Co., Ltd., Shanghai 201400, China.
ORCID-Profile: Xing Zheng, Jiayu Tian
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Tianjin City, China
- Natural Science Foundation of Hebei Province, China
- Key-Area Research and Development Program of Guangdong Province, China
Zitieren
APA
Huang, R., Pan, H., Zheng, X., Fan, C., Si, W., Bao, D., Gao, S., & Tian, J. (2023). Effect of Membrane Pore Size on Membrane Fouling of Corundum Ceramic Membrane in MBR. International Journal of Environmental Research and Public Health, 20(5), 4558. https://doi.org/10.3390/ijerph20054558
Vancouver
Huang R, Pan H, Zheng X, Fan C, Si W, Bao D, et al. Effect of Membrane Pore Size on Membrane Fouling of Corundum Ceramic Membrane in MBR. International Journal of Environmental Research and Public Health. 2023;20(5):4558. doi:10.3390/ijerph20054558
BibTeX
@article{Huang2023,
author = {Huang, Rui and Pan, Hui and Zheng, Xing and Fan, Chao and Si, Wenyan and Bao, Dongguan and Gao, Shanshan and Tian, Jiayu},
title = {Effect of Membrane Pore Size on Membrane Fouling of Corundum Ceramic Membrane in MBR},
journal = {International Journal of Environmental Research and Public Health},
year = {2023},
volume = {20},
number = {5},
pages = {4558},
doi = {10.3390/ijerph20054558}
}
EUVIMED