Development and Performance of Elastomer Seals for Hydrogen Storage and Distribution Systems: Challenges, Solutions, and Future Perspectives—Part I: The Influence of Pressurized Hydrogen on Materials for Elastomer Seals
Hydrogen · 17.10.2026 · 7 (4) · 160
DOI: 10.3390/hydrogen7040160 ↗Kurz gefasst
Fachartikel in der Zeitschrift Hydrogen, online erschienen am 17.10.2026. Verfasst von Emanuele Sgambitterra und 1 weiteren Autor:innen. Die Arbeit nennt 112 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This review presents a comprehensive analysis of the behavior of elastomeric sealing materials in high-pressure hydrogen environments by systematically comparing mechanical and physical properties before and after exposure. Unlike existing studies in the literature, which often treat these states in isolation, this work consolidates a broad set of peer-reviewed experimental studies on the most widely used elastomers (NBR, HNBR, EPDM, FKM, and VMQ). By providing a “full view” of material evolution, we provide a complete overview of how hydrogen uptake specifically alters critical performance metrics—such as tensile strength, modulus, and fracture resistance—and correlate these changes with degradation mechanisms like swelling and Rapid Gas Decompression (RGD). This unique approach allows for the identification of precise degradation trends that are otherwise obscured in fragmented studies. As Part I of a two-part series, this manuscript establishes the first holistic baseline for material understanding/selection, offering a rigorous foundation for the component-level engineering to be discussed in the forthcoming Part II.
Zitieren
APA
Sgambitterra, E., & Pagnotta, L. (2026). Development and Performance of Elastomer Seals for Hydrogen Storage and Distribution Systems: Challenges, Solutions, and Future Perspectives—Part I: The Influence of Pressurized Hydrogen on Materials for Elastomer Seals. Hydrogen, 7(4), 160. https://doi.org/10.3390/hydrogen7040160
Vancouver
Sgambitterra E, Pagnotta L. Development and Performance of Elastomer Seals for Hydrogen Storage and Distribution Systems: Challenges, Solutions, and Future Perspectives—Part I: The Influence of Pressurized Hydrogen on Materials for Elastomer Seals. Hydrogen. 2026;7(4):160. doi:10.3390/hydrogen7040160
BibTeX
@article{Sgambitterra2026,
author = {Sgambitterra, Emanuele and Pagnotta, Leonardo},
title = {Development and Performance of Elastomer Seals for Hydrogen Storage and Distribution Systems: Challenges, Solutions, and Future Perspectives—Part I: The Influence of Pressurized Hydrogen on Materials for Elastomer Seals},
journal = {Hydrogen},
year = {2026},
volume = {7},
number = {4},
pages = {160},
doi = {10.3390/hydrogen7040160}
}
EUVIMED