The Development of a 3D Magnetic Field Scanner Using Additive Technologies
Hardware · 11.11.2024 · 2 (4) · 279-291
DOI: 10.3390/hardware2040014 ↗Kurz gefasst
Fachartikel in der Zeitschrift Hardware, online erschienen am 11.11.2024. Verfasst von Artem Sobko und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Russian Science Foundation.
Abstract (Originalsprache)
Visualizing magnetic fields is essential for studying the operation of electromagnetic systems and devices that use permanent magnets or magnetic particles. However, commercial devices for this purpose are often expensive due to their complex designs, which may not always be necessary for specific research needs. This work presents a method for designing an automated laboratory setup for magnetic cartography, utilizing a 3D printer to produce structural plastic components for the scanner. The assembly process is thoroughly described, covering both the hardware and software aspects. Spatial resolution and mapping parameters, such as the number of data points and the collection time, were configured through software. Multiple tests were conducted on samples featuring flat inductive coils on a printed circuit board, providing a reliable model for comparing calculated and measured results. The scanner offers several advantages, including a straightforward design, readily available materials and components, a large scanning area (100 mm × 100 mm × 100 mm), a user-friendly interface, and adaptability for specific tasks. Additionally, the integration of a pre-built macro enables connection to any PC running Windows, while the open-source microcontroller code allows users to customize the scanner’s functionality to meet their specific requirements.
Förderung
- Russian Science Foundation
Zitieren
APA
Sobko, A., Yudanov, N., Panina, L. V., & Rodionova, V. (2024). The Development of a 3D Magnetic Field Scanner Using Additive Technologies. Hardware, 2(4), 279-291. https://doi.org/10.3390/hardware2040014
Vancouver
Sobko A, Yudanov N, Panina LV, Rodionova V. The Development of a 3D Magnetic Field Scanner Using Additive Technologies. Hardware. 2024;2(4):279-291. doi:10.3390/hardware2040014
BibTeX
@article{Sobko2024,
author = {Sobko, Artem and Yudanov, Nikolai and Panina, Larissa V. and Rodionova, Valeriya},
title = {The Development of a 3D Magnetic Field Scanner Using Additive Technologies},
journal = {Hardware},
year = {2024},
volume = {2},
number = {4},
pages = {279--291},
doi = {10.3390/hardware2040014}
}
EUVIMED