EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Agarose Cryogels: Production Process Modeling and Structural Characterization

Raffaele Mancino, Diego Caccavo iD, Anna Angela Barba iD, Gaetano Lamberti iD, Alice Biasin iD, Angelo Cortesi iD, Gabriele Grassi iD, Mario Grassi iD, Michela Abrami

Gels · 20.09.2023 · 9 (9) · 765

DOI: 10.3390/gels9090765 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 20.09.2023. Verfasst von Raffaele Mancino und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering, University of Salerno, 84084 Fisciano, SA, Italy. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A cryogel is a cross-linked polymer network with different properties that are determined by its manufacturing technique. The formation of a cryogel occurs at low temperatures and results in a porous structure whose pore size is affected by thermal conditions. The adjustable pore sizes of cryogels make them attractive for diverse applications. In this study, the influence of the external operational temperature, which affects the cooling and freezing rates, on the production of cryogels with 2% w/w agarose is investigated. Moreover, a mathematical model is developed to simulate the cryogel production process and provide an initial estimate of the pore size within the structure. The predictions of the model, supported by qualitative light microscopy images, demonstrate that cryogels produced at higher process temperatures exhibit larger pore sizes. Moreover, the existence of pore size distribution within the gel structure is confirmed. Finally, stress relaxation tests, coupled with an image analysis, validates that cryogels produced at lower temperatures possess a higher stiffness and slower water release rates.

Schlagwörter

Stichwörter der Autor:innen

agarosecryogelsequilibriumhydrogelsmodelingrheology

Autor:innen und Institutionen

  • Department of Industrial Engineering, University of Salerno, 84084 Fisciano, SA, Italy.
  • Eng4Life Srl, Via Circumvallazione 39, 83100 Avellino, AV, Italy.
  • EST Srl, Academic Spin-Off, Via Circumvallazione 39, 83100 Avellino, AV, Italy.
  • Department of Pharmacy, University of Salerno, 84084 Fisciano, SA, Italy.
  • Department of Engineering and Architecture, University of Trieste, Via Valerio 6, 34127 Trieste, TS, Italy.
  • Department of Life Sciences, Cattinara University Hospital, Trieste University, Strada di Fiume 447, 34149 Trieste, TS, Italy.

ORCID-Profile: Diego Caccavo, Anna Angela Barba, Gaetano Lamberti, Alice Biasin, Angelo Cortesi, Gabriele Grassi, Mario Grassi

Zitieren

APA

Mancino, R., Caccavo, D., Barba, A. A., Lamberti, G., Biasin, A., Cortesi, A., Grassi, G., Grassi, M., & Abrami, M. (2023). Agarose Cryogels: Production Process Modeling and Structural Characterization. Gels, 9(9), 765. https://doi.org/10.3390/gels9090765

Vancouver

Mancino R, Caccavo D, Barba AA, Lamberti G, Biasin A, Cortesi A, et al. Agarose Cryogels: Production Process Modeling and Structural Characterization. Gels. 2023;9(9):765. doi:10.3390/gels9090765

BibTeX
@article{Mancino2023,
  author = {Mancino, Raffaele and Caccavo, Diego and Barba, Anna Angela and Lamberti, Gaetano and Biasin, Alice and Cortesi, Angelo and Grassi, Gabriele and Grassi, Mario and Abrami, Michela},
  title = {Agarose Cryogels: Production Process Modeling and Structural Characterization},
  journal = {Gels},
  year = {2023},
  volume = {9},
  number = {9},
  pages = {765},
  doi = {10.3390/gels9090765}
}
Kostenlos starten →