Graphene Oxide/Styrene-Butadiene Latex Hybrid Aerogel with Improved Mechanical Properties by PEI Grafted GO and CNT
Gels · 16.05.2023 · 9 (5) · 419
DOI: 10.3390/gels9050419 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gels, online erschienen am 16.05.2023. Verfasst von Zetian Zhao und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Polymer Materials, School of Material Science and Engineering, Qingdao University, No. 308 Ningxia Road, Qingdao 266071, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of China, China postdoctoral Science Foundation, Natural Science Foundation of Shandong Province.
Abstract (Originalsprache)
Graphene oxide aerogel (GOA) has wide application prospects due to its low density and high porosity. However, the poor mechanical properties and unstable structure of GOA have limited its practical applications. In this study, polyethyleneimide (PEI) was used to graft onto the surface of GO and carbon nanotubes (CNTs) to improve compatibility with polymers. Composite GOA was prepared by adding styrene-butadiene latex (SBL) to the modified GO and CNTs. The synergistic effect of PEI and SBL, resulted in an aerogel with excellent mechanical properties, compressive resistance, and structural stability. When the ratio of SBL to GO and GO to CNTs was 2:1 and 7:3, respectively, the obtained aerogel performance was the best, and the maximum compressive stress was 784.35% higher than that of GOA. The graft of PEI on the surface of GO and CNT could improve the mechanical properties of the aerogel, with greater improvements observed with grafting onto the surface of GO. Compared with GO/CNT/SBL aerogel without PEI grafting, the maximum stress of GO/CNT–PEI/SBL aerogel increased by 5.57%, that of GO–PEI/CNT/SBL aerogel increased by 20.25%, and that of GO–PEI/CNT–PEI/SBL aerogel increased by 28.99%. This work not only provided a possibility for the practical application of aerogel, but also steered the research of GOA in a new direction.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Polymer Materials, School of Material Science and Engineering, Qingdao University, No. 308 Ningxia Road, Qingdao 266071, China.
Förderung
- Natural Science Foundation of China
- China postdoctoral Science Foundation
- Natural Science Foundation of Shandong Province
- Qingdao Postdoctoral Scientific Research Foundation
Zitieren
APA
Zhao, Z., Zhang, L., Song, Y., Ma, L., Li, J., Zhao, M., Ji, X., Gao, J., Song, G., & Li, X. (2023). Graphene Oxide/Styrene-Butadiene Latex Hybrid Aerogel with Improved Mechanical Properties by PEI Grafted GO and CNT. Gels, 9(5), 419. https://doi.org/10.3390/gels9050419
Vancouver
Zhao Z, Zhang L, Song Y, Ma L, Li J, Zhao M, et al. Graphene Oxide/Styrene-Butadiene Latex Hybrid Aerogel with Improved Mechanical Properties by PEI Grafted GO and CNT. Gels. 2023;9(5):419. doi:10.3390/gels9050419
BibTeX
@article{Zhao2023,
author = {Zhao, Zetian and Zhang, Lina and Song, Yinghu and Ma, Lichun and Li, Jialiang and Zhao, Min and Ji, Xueliang and Gao, Jianfei and Song, Guojun and Li, Xiaoru},
title = {Graphene Oxide/Styrene-Butadiene Latex Hybrid Aerogel with Improved Mechanical Properties by PEI Grafted GO and CNT},
journal = {Gels},
year = {2023},
volume = {9},
number = {5},
pages = {419},
doi = {10.3390/gels9050419}
}
EUVIMED