Origin of the Springback Effect in Ambient-Pressure-Dried Silica Aerogels: The Effect of Surface Silylation
Gels · 16.02.2023 · 9 (2) · 160
DOI: 10.3390/gels9020160 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gels, online erschienen am 16.02.2023. Verfasst von Fabian Zemke und 6 weiteren Autor:innen. Beteiligte Einrichtung: Chair of Advanced Ceramic Materials, Institute of Materials Science and Technology, Faculty III Process Sciences, Technische Universität Berlin, Stra…. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.
Abstract (Originalsprache)
Ambient pressure drying (APD) can prospectively reduce the costs of aerogel fabrication and processing. APD relies solely on preventing shrinkage or making it reversible. The latter, i.e., the aerogel re-expansion after drying (so-called springback effect—SBE), needs to be controlled for reproducible aerogel fabrication by APD. This can be achieved by an appropriate surface functionalization of aerogel materials (e.g., SiO2). This work addresses the fabrication of monolithic SiO2 aerogels and xerogels by APD. The effect of several silylation agents, i.e., trimethylchlorosilane, triethylchlorosilane, and hexamethyldisilazane on the SBE is studied in detail, applying several complementary experimental techniques, allowing the evaluation of the macroscopic and microscopic morphology as well as the composition of SiO2 aerogels. Here, we show that some physical properties, e.g., the bulk density, the macroscopic structure, and pore sizes/volumes, were significantly affected by the re-expansion. However, silylation did not necessarily lead to full re-expansion. Therefore, similarities in the molecular composition could not be equated to similarities in the SBE. The influences of steric hindrance and reactivity are discussed. The impact of silylation is crucial in tailoring the SBE and, as a result, the APD of monolithic aerogels.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Chair of Advanced Ceramic Materials, Institute of Materials Science and Technology, Faculty III Process Sciences, Technische Universität Berlin, Straße des 17. Juni 135, 10623 Berlin, Germany.
- Department of Biomaterials, Max Planck Institute of Colloids and Interfaces, Am Mühlenberg 1, 14476 Potsdam, Germany.
ORCID-Profile: Fabian Zemke, Julien Gonthier, Ernesto Scoppola, Ulla Simon, Maged F Bekheet, Wolfgang Wagermaier, Aleksander Gurlo
Förderung
- Deutsche Forschungsgemeinschaft
Zitieren
APA
Zemke, F., Gonthier, J., Scoppola, E., Simon, U., Bekheet, M. F., Wagermaier, W., & Gurlo, A. (2023). Origin of the Springback Effect in Ambient-Pressure-Dried Silica Aerogels: The Effect of Surface Silylation. Gels, 9(2), 160. https://doi.org/10.3390/gels9020160
Vancouver
Zemke F, Gonthier J, Scoppola E, Simon U, Bekheet MF, Wagermaier W, et al. Origin of the Springback Effect in Ambient-Pressure-Dried Silica Aerogels: The Effect of Surface Silylation. Gels. 2023;9(2):160. doi:10.3390/gels9020160
BibTeX
@article{Zemke2023,
author = {Zemke, Fabian and Gonthier, Julien and Scoppola, Ernesto and Simon, Ulla and Bekheet, Maged F and Wagermaier, Wolfgang and Gurlo, Aleksander},
title = {Origin of the Springback Effect in Ambient-Pressure-Dried Silica Aerogels: The Effect of Surface Silylation},
journal = {Gels},
year = {2023},
volume = {9},
number = {2},
pages = {160},
doi = {10.3390/gels9020160}
}
EUVIMED