EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Vapor Phase Ammonia Curing to Improve the Mechanical Properties of Antireflection Optical Coatings Designed for Power Laser Optics

Jérémy Avice, Guillaume Brotons, Pascal Ruello, Gwenaëlle Vaudel iD, Amira Guediche, Hervé Piombini

Gels · 07.02.2023 · 9 (2) · 140

DOI: 10.3390/gels9020140 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 07.02.2023. Verfasst von Jérémy Avice und 5 weiteren Autor:innen. Beteiligte Einrichtung: CEA, DAM Le Ripault, 37260 Monts, France. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Projects of inertial confinement fusion using lasers need numerous optical components whose coatings allow the increase in their transmission and their resistance to high laser fluence. A coating process based on the self-assembly of sol–gel silica nanoparticles and a post-treatment with ammonia vapor over the surfaces of the optical components (“ammonia curing process”) was developed and successfully optimized for industrial production. Manufacturing such antireflective coatings has clear advantages: (i) it is much cheaper than conventional top-down processes; (ii) it is well adapted to large-sized optical components and large-scale production; and (iii) it gives low optical losses in transmission and high resistances to laser fluence. The post-treatment was achieved by a simple exposition of optical components to room-temperature ammonia vapors. The resulting curing process induced strong optical and mechanical changes at the interface and was revealed to be of paramount importance since it reinforced the adhesion and abrasion resistance of the components so that the optical components could be handled easily. Here, we discuss how such coatings were characterized and how the initial thin nanoparticle film was transformed from a brittle film to a resistant coating from the ammonia curing process.

Schlagwörter

Stichwörter der Autor:innen

ammonia curinginfrared analysisoptical indexshrinkagesol–gel

Autor:innen und Institutionen

  • CEA, DAM Le Ripault, 37260 Monts, France.
  • Institut des Molécules et Matériaux du Mans, UMR 6283 CNRS-Le Mans Université, Av. Olivier Messiaen, CEDEX 9, 72085 Le Mans, France.

ORCID-Profile: Gwenaëlle Vaudel

Zitieren

APA

Avice, J., Brotons, G., Ruello, P., Vaudel, G., Guediche, A., & Piombini, H. (2023). Vapor Phase Ammonia Curing to Improve the Mechanical Properties of Antireflection Optical Coatings Designed for Power Laser Optics. Gels, 9(2), 140. https://doi.org/10.3390/gels9020140

Vancouver

Avice J, Brotons G, Ruello P, Vaudel G, Guediche A, Piombini H. Vapor Phase Ammonia Curing to Improve the Mechanical Properties of Antireflection Optical Coatings Designed for Power Laser Optics. Gels. 2023;9(2):140. doi:10.3390/gels9020140

BibTeX
@article{Avice2023,
  author = {Avice, Jérémy and Brotons, Guillaume and Ruello, Pascal and Vaudel, Gwenaëlle and Guediche, Amira and Piombini, Hervé},
  title = {Vapor Phase Ammonia Curing to Improve the Mechanical Properties of Antireflection Optical Coatings Designed for Power Laser Optics},
  journal = {Gels},
  year = {2023},
  volume = {9},
  number = {2},
  pages = {140},
  doi = {10.3390/gels9020140}
}
Kostenlos starten →