EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structural Design and Cyclic Reliability of Conductive Hydrogel Strain Sensors

Jiajia Deng, Sheng Hu

Gels · 18.11.2026 · 12 (11) · 1049

DOI: 10.3390/gels12111049 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 18.11.2026. Verfasst von Jiajia Deng und 1 weiteren Autor:innen. Die Arbeit nennt 118 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conductive hydrogels combine compliance, stretchability, and electrical responsiveness, enabling deformation sensing through resistance or capacitance changes and providing a material basis for wearable motion monitoring. However, toughness, low hysteresis within a single cycle, and repeatable output over prolonged cycling describe distinct properties; none alone establishes whether a sensor retains its original calibration during sustained use. Understanding this distinction requires examining how differences in the extent and timescale of recovery in load-bearing structures, conductive pathways, and interfacial contacts produce asynchronous changes in mechanical state, signal baseline, response amplitude, and loading–unloading trajectories. This review examines structural design and cyclic reliability in conductive hydrogel strain sensors, analyzing how reversible connections, interchain constraints, and interphase coupling affect mechanical dissipation and conductive-pathway rearrangement, and how device interfaces influence deformation transfer and electrical readout. It further evaluates the applicability and performance limits of structural strategies by considering crack resistance–cyclic dissipation trade-offs and the relationships between recovery time, loading schedule, strain amplitude, loading rate, hydration state, and readout conditions. Cyclic reliability should therefore be evaluated through calibration retention and strain measurement error under specified operating conditions, linking material recovery to specific measurement tasks and guiding the coordinated selection of material structures, device interfaces, and operating conditions.

Zitieren

APA

Deng, J., & Hu, S. (2026). Structural Design and Cyclic Reliability of Conductive Hydrogel Strain Sensors. Gels, 12(11), 1049. https://doi.org/10.3390/gels12111049

Vancouver

Deng J, Hu S. Structural Design and Cyclic Reliability of Conductive Hydrogel Strain Sensors. Gels. 2026;12(11):1049. doi:10.3390/gels12111049

BibTeX
@article{Deng2026,
  author = {Deng, Jiajia and Hu, Sheng},
  title = {Structural Design and Cyclic Reliability of Conductive Hydrogel Strain Sensors},
  journal = {Gels},
  year = {2026},
  volume = {12},
  number = {11},
  pages = {1049},
  doi = {10.3390/gels12111049}
}
Kostenlos starten →