EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Water Resistance and Mechanical Properties of Thermo-Compressed Konjac Glucomannan Xerogel Films by Ammonia-Vapor Treatment

Apirada Manphae, Jenjira Jirum, Patcharee Sittichan, Yodthong Baimark

Gels · 12.11.2026 · 12 (11) · 1034

DOI: 10.3390/gels12111034 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 12.11.2026. Verfasst von Apirada Manphae und 3 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mahasarakham University, Centre of Excellence for Innovation in Chemistry (PERCH-CIC), Office of the Higher Education Commission, Ministry of Education.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Konjac glucomannan (KGM) is a hydrophilic polysaccharide with film- and gel-forming properties. This study investigated the effects of ammonia-vapor treatment on the structural, physicochemical, morphological, and mechanical properties of thermo-compressed KGM xerogel films. KGM was mixed with water and glycerol, thermo-compressed into xerogel films, and exposed to ammonia vapor for 6, 12, 24, or 48 h. Ammonia-vapor treatment progressively increased the degree of deacetylation. The water contact angle increased, whereas moisture content, water-induced mass loss, water vapor permeability, and swelling degree decreased. The swelling degree decreased from 1072% in untreated films to 538%, 477%, 437%, and 422% after 6, 12, 24, and 48 h, respectively. Surface pits and pores became more pronounced with increasing treatment duration, while the cross-sections remained dense and continuous. A treatment duration of 12 h provided the best combined mechanical performance, with tensile strength, elongation at break, and tensile toughness increasing by 1.58-, 1.77-, and 3.58-fold, respectively, compared with untreated films. These findings demonstrate improvements in water resistance and mechanical performance. However, further evaluation of residual ammonia content, hydrated mechanical properties, fluid management, and biological safety is required before the films can be considered suitable for wound-dressing applications.

Förderung

  • Mahasarakham University
  • Centre of Excellence for Innovation in Chemistry (PERCH-CIC), Office of the Higher Education Commission, Ministry of Education

Zitieren

APA

Manphae, A., Jirum, J., Sittichan, P., & Baimark, Y. (2026). Enhanced Water Resistance and Mechanical Properties of Thermo-Compressed Konjac Glucomannan Xerogel Films by Ammonia-Vapor Treatment. Gels, 12(11), 1034. https://doi.org/10.3390/gels12111034

Vancouver

Manphae A, Jirum J, Sittichan P, Baimark Y. Enhanced Water Resistance and Mechanical Properties of Thermo-Compressed Konjac Glucomannan Xerogel Films by Ammonia-Vapor Treatment. Gels. 2026;12(11):1034. doi:10.3390/gels12111034

BibTeX
@article{Manphae2026,
  author = {Manphae, Apirada and Jirum, Jenjira and Sittichan, Patcharee and Baimark, Yodthong},
  title = {Enhanced Water Resistance and Mechanical Properties of Thermo-Compressed Konjac Glucomannan Xerogel Films by Ammonia-Vapor Treatment},
  journal = {Gels},
  year = {2026},
  volume = {12},
  number = {11},
  pages = {1034},
  doi = {10.3390/gels12111034}
}
Kostenlos starten →