Anisotropic Cotton-Stalk-Derived Hydrothermally Treated Cellulose–Chitosan Aerogels Toward Anionic Dye Adsorption and Water-in-Oil Emulsion Separation
Gels · 05.09.2026 · 12 (9) · 814
DOI: 10.3390/gels12090814 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gels, online erschienen am 05.09.2026. Verfasst von Shixue He und 3 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Oil & Gas Fine Chemicals, Ministry of Education & Xinjiang Uygur Autonomous Region, School of Chemical Engineering, Xinjiang Univer…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tianshan Talent Program of the Xinjiang Uygur Autonomous Region, Outstanding Youth Project of the Xinjiang Uygur Autonomous Region, National Natural Science Foundation of China.
Abstract (Originalsprache)
Transforming agricultural residues into functional porous materials provides a sustainable strategy for wastewater remediation. Herein, cellulose was separated from cotton stalks via formic acid-assisted hemicellulose extraction and sodium chlorite delignification, and then sulfuric acid hydrolysis. Chitosan-assisted hydrothermally treated cellulose (CC) was prepared via hydrothermal treatment in the presence of chitosan. Anisotropic CC/chitosan composite aerogels were prepared via glutaraldehyde crosslinking and unidirectional freeze-drying. The hydrophilic CC/CS aerogel exhibited an oriented porous structure, a low density of 0.03 g cm−3, and a porosity of 85.33%. For Congo red (CR) adsorption, the equilibrium data were described well by the pseudo-second-order kinetic and Langmuir isotherm models, with a calculated maximum adsorption capacity of 483.09 mg g−1. Electrostatic attraction, hydrogen bonding, and pore-mediated retention jointly contributed to CR uptake. To realize oil–water separation, methyltrimethoxysilane (MTMS) vapor modification was applied to prepare hydrophobic aerogel (M-CC/CS). M-CC/CS presented an initial water contact angle (WCA) of around 134°, and the WCA remained above 115° after 600 s of water droplet exposure. The aerogel showed absorption capacities of 16.22–40.13 g g−1 toward various oils and organic solvents. Under gravity, M-CC/CS separated immiscible oil/water mixtures at a flux of 565.47 L m−2 h−1 and several water-in-oil (W/O) emulsions with efficiencies above 99.9% while maintaining high separation efficiency over 10 cycles. This work demonstrates a cotton-stalk-derived aerogel platform whose hydrophilic and hydrophobically modified forms can be used for dye adsorption and oily water treatment, respectively.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Oil & Gas Fine Chemicals, Ministry of Education & Xinjiang Uygur Autonomous Region, School of Chemical Engineering, Xinjiang University, Urumqi 830017, China.
- School of Mechanical Engineering & Center for Post-doctoral Studies of Mechanical Engineering, Xinjiang University, Urumqi 830017, China.
Förderung
- Tianshan Talent Program of the Xinjiang Uygur Autonomous Region
- Outstanding Youth Project of the Xinjiang Uygur Autonomous Region
- National Natural Science Foundation of China
- Tianshan Innovation Team Project of Xinjiang Uygur Autonomous Region
- Tianshan Innovation Team Project of the Xinjiang Uygur Autonomous Region
Zitieren
APA
He, S., Zhang, C., Lang, D., & Wu, R. (2026). Anisotropic Cotton-Stalk-Derived Hydrothermally Treated Cellulose–Chitosan Aerogels Toward Anionic Dye Adsorption and Water-in-Oil Emulsion Separation. Gels, 12(9), 814. https://doi.org/10.3390/gels12090814
Vancouver
He S, Zhang C, Lang D, Wu R. Anisotropic Cotton-Stalk-Derived Hydrothermally Treated Cellulose–Chitosan Aerogels Toward Anionic Dye Adsorption and Water-in-Oil Emulsion Separation. Gels. 2026;12(9):814. doi:10.3390/gels12090814
BibTeX
@article{He2026,
author = {He, Shixue and Zhang, Chengbo and Lang, Daning and Wu, Ronglan},
title = {Anisotropic Cotton-Stalk-Derived Hydrothermally Treated Cellulose–Chitosan Aerogels Toward Anionic Dye Adsorption and Water-in-Oil Emulsion Separation},
journal = {Gels},
year = {2026},
volume = {12},
number = {9},
pages = {814},
doi = {10.3390/gels12090814}
}
EUVIMED