EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Advances in 3D Bioprinting for Scaffold-Based and Scaffold-Free Tissue Engineering and Regenerative Medicine

Kannan Badri Narayanan iD

Gels · 03.08.2026 · 12 (8) · 691

DOI: 10.3390/gels12080691 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Gels, online erschienen am 03.08.2026. Verfasst von Kannan Badri Narayanan. Beteiligte Einrichtung: School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Gyeongbuk, Republic of Korea. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 232 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional (3D) bioprinting has emerged as a versatile biofabrication strategy that enables the precise, spatiotemporally controlled co-deposition of living cells, biomaterials, and bioactive agents, including growth factors, cytokines, and extracellular matrix (ECM) components, into geometrically defined 3D constructs. By translating digital design models derived from computed tomography (CT), magnetic resonance imaging (MRI), or computational modeling directly into physical tissue architectures, 3D bioprinting facilitates the assembly of hierarchically organized constructs that closely recapitulate the structural, mechanical, and functional characteristics of native tissues. The principal 3D bioprinting strategies are broadly classified into scaffold-based and scaffold-free approaches. Engineered bioinks, whether formulated as cell-laden natural, synthetic, or composite polymer hydrogels, tissue-derived decellularized ECM (dECM) components, or pure cellular spheroids and organoids, constitute the cornerstone of these biofabrication platforms. Scaffold-based 3D bioprinting comprises extrusion-based, droplet-based (inkjet and drop-on-demand), light-based vat photopolymerization (stereolithography and digital light processing), and laser-assisted bioprinting based on laser-induced forward transfer (LIFT). Each of these modalities imposes distinct constraints on bioink rheology, crosslinking mechanisms, spatial resolution, throughput, and post-printing cell viability; consequently, a specific 3D bioprinting strategy is selected according to the specific requirements of the target tissue application. Scaffold-free 3D bioprinting and bioassembly techniques, including the Kenzan method, aspiration-assisted bioprinting, magnetic bioprinting, and other field-directed tissue assembly approaches, enable the fabrication of spheroid- and organoid-based constructs without the necessity for exogenous biomaterial scaffolds. Because native tissues exhibit diversity in cellular composition, ECM architecture, mechanical properties, and physiological function, no individual bioprinting platform or bioink formulation serves as a universal 3D bioprinting solution. The engineering of biomimetic tissue constructs, therefore, requires the selection of application-tailored fabrication approaches. Under this biofabrication paradigm, 3D bioprinting has been applied across a wide range of tissue engineering targets, including skin, bone, cartilage, osteochondral interfaces, cardiac and vascular tissue, neural structures, ocular, dental, and adipose tissue. This review discusses recent advances in scaffold-based and scaffold-free 3D bioprinting applications for tissue engineering and regenerative medicine across diverse tissue systems.

Schlagwörter

Stichwörter der Autor:innen

3D printingbioassemblydroplet-basedextrusion-basedlaser-mediatedlight-basedregenerative medicinescaffold-basedscaffold-freetissue engineering

Autor:innen und Institutionen

  • School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Gyeongbuk, Republic of Korea.
  • Research Institute of Cell Culture, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Gyeongbuk, Republic of Korea.

ORCID-Profile: Kannan Badri Narayanan

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Narayanan, K. B. (2026). Advances in 3D Bioprinting for Scaffold-Based and Scaffold-Free Tissue Engineering and Regenerative Medicine. Gels, 12(8), 691. https://doi.org/10.3390/gels12080691

Vancouver

Narayanan KB. Advances in 3D Bioprinting for Scaffold-Based and Scaffold-Free Tissue Engineering and Regenerative Medicine. Gels. 2026;12(8):691. doi:10.3390/gels12080691

BibTeX
@article{Narayanan2026,
  author = {Narayanan, Kannan Badri},
  title = {Advances in 3D Bioprinting for Scaffold-Based and Scaffold-Free Tissue Engineering and Regenerative Medicine},
  journal = {Gels},
  year = {2026},
  volume = {12},
  number = {8},
  pages = {691},
  doi = {10.3390/gels12080691}
}
Kostenlos starten →