Polydopamine-Modified Boron Nitride Reinforced Silicone Gel Composites with Enhanced Thermal Conductivity and Electrical Insulation Performance
Gels · 19.07.2026 · 12 (7) · 644
DOI: 10.3390/gels12070644 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gels, online erschienen am 19.07.2026. Verfasst von Mengjia Feng und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Smart Power Distribution Equipment and System, Hebei University of Technology, Tianjin 300123, China. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, the Natural Science Foundation of Tianjin, Natural Science Foundation of Tianjin.
Abstract (Originalsprache)
Silicone gel (SG) is widely used as a soft encapsulation material for high-voltage power devices because of its excellent flexibility, thermal stability, and electrical insulation. However, its intrinsically low thermal conductivity and susceptibility to partial discharge (PD) at triple-junction interfaces restrict long-term operational reliability. In this study, polydopamine-modified hexagonal boron nitride (P-BN) was introduced into silicone gel to construct thermally conductive and electrically insulating composites. The SG/P-BN composites exhibited reduced filler agglomeration and a more continuous filler–matrix morphology than the corresponding SG/BN composites, while the model-extrapolated trap analysis suggested composition-dependent changes in the higher energy charge trapping states of the P-BN-containing composites. As a result, the SG/P-BN composites exhibited enhanced thermal stability, reduced coefficient of thermal expansion, and improved heat-transfer capability, with thermal conductivity increasing from 0.183 W/m·K for pristine SG to 0.25 W/m·K. The composite containing 2 wt% P-BN showed the best insulation performance, with breakdown strength increasing from 24.05 to 28.45 kV/mm at 25 °C and from 19.59 to 24.71 kV/mm at 150 °C. Under a simplified triple-junction laboratory configuration, the PD inception voltage increased from approximately 3.1 kV for pristine SG to 4.1 kV for SG/P-BN2, accompanied by fewer high-amplitude discharges. This work demonstrates improved material-level thermal conductivity and electrical insulation performance of P-BN-containing silicone gel composites under the investigated laboratory conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Smart Power Distribution Equipment and System, Hebei University of Technology, Tianjin 300123, China.
- School of Electrical Engineering, Hebei University of Technology, Tianjin 300123, China.
- School of Mechanical Engineering, Hebei University of Technology, Tianjin 300123, China.
ORCID-Profile: Mengjia Feng
Förderung
- National Natural Science Foundation of China
- the Natural Science Foundation of Tianjin
- Natural Science Foundation of Tianjin
Zitieren
APA
Feng, M., Zhao, C., Li, W., Lv, X., Cui, Z., Guo, J., & Hao, M. (2026). Polydopamine-Modified Boron Nitride Reinforced Silicone Gel Composites with Enhanced Thermal Conductivity and Electrical Insulation Performance. Gels, 12(7), 644. https://doi.org/10.3390/gels12070644
Vancouver
Feng M, Zhao C, Li W, Lv X, Cui Z, Guo J, et al. Polydopamine-Modified Boron Nitride Reinforced Silicone Gel Composites with Enhanced Thermal Conductivity and Electrical Insulation Performance. Gels. 2026;12(7):644. doi:10.3390/gels12070644
BibTeX
@article{Feng2026,
author = {Feng, Mengjia and Zhao, Chaoyue and Li, Wenbo and Lv, Xinfeng and Cui, Zichen and Guo, Jianzeng and Hao, Mai},
title = {Polydopamine-Modified Boron Nitride Reinforced Silicone Gel Composites with Enhanced Thermal Conductivity and Electrical Insulation Performance},
journal = {Gels},
year = {2026},
volume = {12},
number = {7},
pages = {644},
doi = {10.3390/gels12070644}
}
EUVIMED