EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Kaolin-Assisted Construction of Superhydrophobic Cellulose Aerogels for Recyclable Oil/Water Separation

Shixue He, Weilong Fei, Ming Shi, Zaijiong Chang, Daning Lang, Ronglan Wu

Gels · 12.06.2026 · 12 (6) · 529

DOI: 10.3390/gels12060529 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 12.06.2026. Verfasst von Shixue He und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Oil & Gas Fine Chemicals, Ministry of Education & Xinjiang Uygur Autonomous Region, School of Chemical Engineering, Xinjiang Univer…. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Xinjiang Uygur Autonomous Region Outstanding Youth Project, Xinjiang Uygur Autonomous Region Tianshan talents project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, oil spill accidents and oily wastewater discharge have posed severe threats to aquatic ecosystems and human health. Developing green, low-cost, efficient, and recyclable oil–water separation materials is therefore important for environmental remediation. In this work, kaolin/cellulose composite aerogels were fabricated through a low-temperature NaOH/urea dissolution system using N,N′-Methylenebisacrylamide (MBA) as the cross-linking agent, followed by freeze-drying and hydrophobic modification with Methyltrimethoxysilane (MTMS). The structure, morphology, thermal stability, wettability, mechanical behavior, oil adsorption capacity, and reusability of the aerogels were systematically investigated. The composite aerogels exhibited a honeycomb-like interconnected porous structure with low density and high porosity. Kaolin acted as an inorganic reinforcing and roughness-regulating component, which promoted the formation and anchoring of an MTMS-derived siloxane/SiO2-like hydrophobic layer on the aerogel surface. The modified aerogels showed superhydrophobicity with a water contact angle above 152° and excellent oleophilicity. The optimized SC3K0.5 aerogel delivered adsorption capacities of 13.5 g/g for pump oil and 12.5 g/g for diesel. After 10 adsorption–desorption cycles, the adsorption capacity remained above 90% of the initial value, indicating good recyclability and mechanical stability. This recyclable kaolin/cellulose aerogel provides a feasible strategy for practical oil–water separation and oily wastewater treatment.

Schlagwörter

Stichwörter der Autor:innen

cellulose aerogelhydrophobic modificationkaolinoil–water separationrecyclabilitysuperhydrophobicity

Autor:innen und Institutionen

  • Key Laboratory of Oil & Gas Fine Chemicals, Ministry of Education & Xinjiang Uygur Autonomous Region, School of Chemical Engineering, Xinjiang University, Urumqi 830017, China.
  • School of Mechanical Engineering & Center for Post-Doctoral Studies of Mechanical Engineering, Xinjiang University, Urumqi 830017, China.

Förderung

  • National Natural Science Foundation of China
  • Xinjiang Uygur Autonomous Region Outstanding Youth Project
  • Xinjiang Uygur Autonomous Region Tianshan talents project

Zitieren

APA

He, S., Fei, W., Shi, M., Chang, Z., Lang, D., & Wu, R. (2026). Kaolin-Assisted Construction of Superhydrophobic Cellulose Aerogels for Recyclable Oil/Water Separation. Gels, 12(6), 529. https://doi.org/10.3390/gels12060529

Vancouver

He S, Fei W, Shi M, Chang Z, Lang D, Wu R. Kaolin-Assisted Construction of Superhydrophobic Cellulose Aerogels for Recyclable Oil/Water Separation. Gels. 2026;12(6):529. doi:10.3390/gels12060529

BibTeX
@article{He2026,
  author = {He, Shixue and Fei, Weilong and Shi, Ming and Chang, Zaijiong and Lang, Daning and Wu, Ronglan},
  title = {Kaolin-Assisted Construction of Superhydrophobic Cellulose Aerogels for Recyclable Oil/Water Separation},
  journal = {Gels},
  year = {2026},
  volume = {12},
  number = {6},
  pages = {529},
  doi = {10.3390/gels12060529}
}
Kostenlos starten →