EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitScoping ReviewOpen Access · CC BY 4.0

Physical and Mechanical Characterisation of 3D-Bioprinted Hydrogels for Dental Applications: A Scoping Review

Nur Haziqah Junaidi, Nurulhuda Mohd iD, Noor Hayaty Abu Kasim, Masfueh Razali iD

Gels · 11.06.2026 · 12 (6) · 524

DOI: 10.3390/gels12060524 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Gels, online erschienen am 11.06.2026. Verfasst von Nur Haziqah Junaidi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Restorative Dentistry, Faculty of Dentistry, Universiti Kebangsaan Malaysia, Jalan Raja Muda Abdul Aziz, Kuala Lumpur 50300, Malaysia. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 108 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Collaborative Research in Engineering, Science and Technology Centre (CREST) R&D Grant (T19-2023), Malaysia..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recent advances in three-dimensional (3D)-bioprinted hydrogels show promise for overcoming the limitations of conventional techniques for dental tissue regeneration. This scoping review systematically analyses the physical, mechanical, and rheological properties of these hydrogels in dental applications, aiming to identify knowledge gaps, limitations, and current and future directions for advancing and translating hydrogel-based 3D bioprinting in dentistry. In accordance with PRISMA-ScR guidelines, a comprehensive literature search was conducted across Ovid, PubMed, EBSCOhost, and Web of Science up to January 2026. Included studies focused on (i) 3D-bioprinted hydrogels, (ii) quantitative characterisation, and (iii) dental tissue engineering. A total of twenty-one studies met the inclusion criteria. The findings revealed substantial variability in formulations and properties. Gelatine-based hydrogels reinforced with β-tricalcium phosphate demonstrated the highest compressive strength within the range of cancellous bone, whereas GelMA/PEGDA composites exhibited tunable stiffness suitable for soft tissue applications. Extrusion-based bioprinting emerged as the predominant method, with photocrosslinking and ionic crosslinking as the primary gelation techniques. Biodegradation rates varied notably with composition and regenerative objectives. This review uniquely consolidates the physical, mechanical, and rheological evaluations of 3D-bioprinted hydrogels for dental applications. The review highlights critical gaps in methodological standardisation and validation, emphasising the importance of biomaterial selection to optimise scaffolds and regenerative outcomes in periodontal, bone, and pulp tissue engineering.

Schlagwörter

Stichwörter der Autor:innen

3D bioprintingdental tissue regenerationhydrogelmechanical propertiesphysical characterisation

Autor:innen und Institutionen

  • Department of Restorative Dentistry, Faculty of Dentistry, Universiti Kebangsaan Malaysia, Jalan Raja Muda Abdul Aziz, Kuala Lumpur 50300, Malaysia.
  • Oral Health Division, Putrajaya 62590, Malaysia.
  • Department of Restorative Dentistry, Faculty of Dentistry, University of Malaya, Kuala Lumpur 50603, Malaysia.
  • Mesomorph Worldwide Sdn. Bhd., Ltd., Kuala Lumpur 52200, Malaysia.

ORCID-Profile: Nurulhuda Mohd, Masfueh Razali

Förderung

  • Collaborative Research in Engineering, Science and Technology Centre (CREST) R&D Grant (T19-2023), Malaysia.

Zitieren

APA

Junaidi, N. H., Mohd, N., Kasim, N. H. A., & Razali, M. (2026). Physical and Mechanical Characterisation of 3D-Bioprinted Hydrogels for Dental Applications: A Scoping Review. Gels, 12(6), 524. https://doi.org/10.3390/gels12060524

Vancouver

Junaidi NH, Mohd N, Kasim NHA, Razali M. Physical and Mechanical Characterisation of 3D-Bioprinted Hydrogels for Dental Applications: A Scoping Review. Gels. 2026;12(6):524. doi:10.3390/gels12060524

BibTeX
@article{Junaidi2026,
  author = {Junaidi, Nur Haziqah and Mohd, Nurulhuda and Kasim, Noor Hayaty Abu and Razali, Masfueh},
  title = {Physical and Mechanical Characterisation of 3D-Bioprinted Hydrogels for Dental Applications: A Scoping Review},
  journal = {Gels},
  year = {2026},
  volume = {12},
  number = {6},
  pages = {524},
  doi = {10.3390/gels12060524}
}
Kostenlos starten →