High-Temperature Induced Sintering Strengthening of Mechanical Properties of Porous Silica: A Molecular Dynamics Study
Gels · 01.02.2026 · 12 (2) · 125
DOI: 10.3390/gels12020125 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gels, online erschienen am 01.02.2026. Verfasst von Ruoyu Bao und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Safety Science and Engineering, Xi'an University of Science and Technology, Xi'an 710054, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangdong Basic and Applied Basic Research Foundation, Shandong Provincial Natural Science Foundation.
Abstract (Originalsprache)
Silica aerogels are critical for thermal protection in extreme environments; however, their mechanical response mechanisms under high temperatures remain elusive. This study employs large-scale molecular dynamics simulations to systematically investigate the mechanical behavior of silica aerogels (0.43–0.71 g/cm3) across a temperature range of 298–1800 K. The results reveal a fundamental competition between thermal softening and sintering-induced strengthening. Under tensile loading, the thermal softening effect dominates, leading to a significant fracture strength reduction of up to 49.6% at 1800 K, while simultaneously enhancing ductility, extending fracture strain to 80%. Conversely, under compressive loading, the sintering effect induced by temperatures above 900 K outweighs softening, resulting in a ~20% increase in the elastic modulus for high-density samples at 1300 K. Microstructural analysis attributes this enhancement to the preferential collapse of large pores and densification into an atomic-scale micropore range (0.5–1.0 nm). This work elucidates how the interplay between softening and sintering dictates material failure or strengthening, providing a microscopic theoretical basis for designing thermal shock-resistant materials for new energy batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Safety Science and Engineering, Xi'an University of Science and Technology, Xi'an 710054, China.
- School of Resources Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China.
- Shenzhen Research Institute, Shandong University, Shenzhen 518057, China.
- Institute for Advanced Technology, Shandong University, Jinan 250061, China.
ORCID-Profile: Mingyang Yang, Mu Du
Förderung
- National Natural Science Foundation of China
- Guangdong Basic and Applied Basic Research Foundation
- Shandong Provincial Natural Science Foundation
Zitieren
APA
Bao, R., Song, Y., Shi, J., Zhang, Y., Cheng, R., Yang, M., & Du, M. (2026). High-Temperature Induced Sintering Strengthening of Mechanical Properties of Porous Silica: A Molecular Dynamics Study. Gels, 12(2), 125. https://doi.org/10.3390/gels12020125
Vancouver
Bao R, Song Y, Shi J, Zhang Y, Cheng R, Yang M, et al. High-Temperature Induced Sintering Strengthening of Mechanical Properties of Porous Silica: A Molecular Dynamics Study. Gels. 2026;12(2):125. doi:10.3390/gels12020125
BibTeX
@article{Bao2026,
author = {Bao, Ruoyu and Song, Yiming and Shi, Jiejie and Zhang, Yuanfu and Cheng, Renhui and Yang, Mingyang and Du, Mu},
title = {High-Temperature Induced Sintering Strengthening of Mechanical Properties of Porous Silica: A Molecular Dynamics Study},
journal = {Gels},
year = {2026},
volume = {12},
number = {2},
pages = {125},
doi = {10.3390/gels12020125}
}
EUVIMED