EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Response Surface Methodology Optimization of Electron-Beam-Irradiated Carboxymethyl Cellulose/Citric Acid-Based Hydrogels

Sa Rang Choi iD, Jung Myoung Lee iD

Gels · 19.11.2025 · 11 (11) · 928

DOI: 10.3390/gels11110928 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 19.11.2025. Verfasst von Sa Rang Choi und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Wood and Paper Science, Kyungpook National University, 80 Daehakro, Daegu 41566, Republic of Korea. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Ministry of Environment, Korea Forest Service, Korea Environment Industry & Technology Institute.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electron beam irradiation (EBI) is an environmentally friendly cross-linking technique that can form covalent bonds between natural polymers without the use of chemical cross-linkers. In this study, carboxymethyl cellulose (CMC; 3000 cPs) and citric acid (CA) were used to prepare hydrogels under low-dose EBI conditions (7 kGy). The effects of composition variables were statistically analyzed using response surface methodology based on central composite design. The concentrations of CMC (4–14 wt%) and CA (1–4 wt%) were selected as independent variables, while the gel fraction, water absorption, and elastic modulus were employed as responses. Analysis of variance confirmed that the quadratic models were statistically significant (p < 0.05) with a high predictive reliability (R2 = 0.91–0.98). Statistical validation demonstrated that the residuals were normally distributed and that all data fell within the 95% prediction interval, verifying the robustness of the model. Multi-response optimization identified an optimal composition of 8.88 wt% CMC and 0.03 wt% CA, yielding a predicted gel fraction of 88.7%, water absorption of 256 g/g, and modulus of 2273 Pa. The extended condition (CMC 9.12 wt%, CA 2.17 × 10−7 wt%) achieved similar absorbency with a ~9% higher modulus. This study established a reliable predictive model correlating the composition and properties of EBI-induced CMC–CA hydrogels, providing a foundation for optimizing eco-friendly hydrogel processes and scaling them up in the future.

Schlagwörter

Stichwörter der Autor:innen

carboxymethyl cellulosecentral composite designcitric acidelectron beam irradiationhydrogelresponse surface methodology

Autor:innen und Institutionen

  • Department of Wood and Paper Science, Kyungpook National University, 80 Daehakro, Daegu 41566, Republic of Korea.

ORCID-Profile: Sa Rang Choi, Jung Myoung Lee

Förderung

  • Korea Ministry of Environment
  • Korea Forest Service
  • Korea Environment Industry & Technology Institute

Zitieren

APA

Choi, S. R., & Lee, J. M. (2025). Response Surface Methodology Optimization of Electron-Beam-Irradiated Carboxymethyl Cellulose/Citric Acid-Based Hydrogels. Gels, 11(11), 928. https://doi.org/10.3390/gels11110928

Vancouver

Choi SR, Lee JM. Response Surface Methodology Optimization of Electron-Beam-Irradiated Carboxymethyl Cellulose/Citric Acid-Based Hydrogels. Gels. 2025;11(11):928. doi:10.3390/gels11110928

BibTeX
@article{Choi2025,
  author = {Choi, Sa Rang and Lee, Jung Myoung},
  title = {Response Surface Methodology Optimization of Electron-Beam-Irradiated Carboxymethyl Cellulose/Citric Acid-Based Hydrogels},
  journal = {Gels},
  year = {2025},
  volume = {11},
  number = {11},
  pages = {928},
  doi = {10.3390/gels11110928}
}
Kostenlos starten →