EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

A Critical Review: Gel-Based Edible Inks for 3D Food Printing: Materials, Rheology–Geometry Mapping, and Control

Zhou Qin, Yang Yang, Zhaomin Zhang, Fanfan Li, Ziqing Hou, Zhihua Li, Jiyong Shi, Tingting Shen

Gels · 29.09.2025 · 11 (10) · 780

DOI: 10.3390/gels11100780 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Gels, online erschienen am 29.09.2025. Verfasst von Zhou Qin und 7 weiteren Autor:innen. Beteiligte Einrichtung: Agricultural Product Processing and Storage Lab, School of Food and Biological Engineering, Jiangsu University, Zhenjiang 212013, China. Die Arbeit wurde bisher 38-mal zitiert (Crossref) und nennt 148 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Edible hydrogels are the central material class in 3D food printing because they reconcile two competing needs: (i) low resistance to flow under nozzle shear and (ii) fast recovery of elastic structure after deposition to preserve geometry. This review consolidates the recent years of progress on hydrogel formulations—gelatin, alginate, pectin, carrageenan, agar, starch-based gels, gellan, and cellulose derivatives, xanthan/konjac blends, protein–polysaccharide composites, and emulsion gels alongside a critical analysis of printing technologies relevant to food: extrusion, inkjet, binder jetting, and laser-based approaches. For each material, this review connects gelation triggers and compositional variables to rheology signatures that govern printability and then maps these to process windows and post-processing routes. This review consolidates a decision-oriented workflow for edible-hydrogel printability that links formulation variables, process parameters, and geometric fidelity through standardized test constructs (single line, bridge, thin wall) and rheology-anchored gates (e.g., yield stress and recovery). Building on these elements, a “printability map/window” is formalized to position inks within actionable operating regions, enabling recipe screening and process transfer. Compared with prior reviews, the emphasis is on decisions: what to measure, how to interpret it, and how to adjust inks and post-set enablers to meet target fidelity and texture. Reporting minima and a stability checklist are identified to close the loop from design to shelf.

Schlagwörter

Stichwörter der Autor:innen

3D food printingedible hydrogelsemulsionextrusiongelsprintabilityrheology

Autor:innen und Institutionen

  • Agricultural Product Processing and Storage Lab, School of Food and Biological Engineering, Jiangsu University, Zhenjiang 212013, China.
  • International Joint Research Laboratory of Intelligent Agriculture and Agro-Products Processing, Jiangsu Education Department, Zhenjiang 212013, China.

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Qin, Z., Yang, Y., Zhang, Z., Li, F., Hou, Z., Li, Z., Shi, J., & Shen, T. (2025). A Critical Review: Gel-Based Edible Inks for 3D Food Printing: Materials, Rheology–Geometry Mapping, and Control. Gels, 11(10), 780. https://doi.org/10.3390/gels11100780

Vancouver

Qin Z, Yang Y, Zhang Z, Li F, Hou Z, Li Z, et al. A Critical Review: Gel-Based Edible Inks for 3D Food Printing: Materials, Rheology–Geometry Mapping, and Control. Gels. 2025;11(10):780. doi:10.3390/gels11100780

BibTeX
@article{Qin2025,
  author = {Qin, Zhou and Yang, Yang and Zhang, Zhaomin and Li, Fanfan and Hou, Ziqing and Li, Zhihua and Shi, Jiyong and Shen, Tingting},
  title = {A Critical Review: Gel-Based Edible Inks for 3D Food Printing: Materials, Rheology–Geometry Mapping, and Control},
  journal = {Gels},
  year = {2025},
  volume = {11},
  number = {10},
  pages = {780},
  doi = {10.3390/gels11100780}
}
Kostenlos starten →