EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Porous and Tough Polyacrylamide/Carboxymethyl Cellulose Gels Chemically Crosslinked via Cryo-UV Polymerization for Sustained Drug Release

Duangkamon Viboonratanasri, Daniel Rudolf King, Tsuyoshi Okumura iD, Mohamad Alaa Terkawi iD, Yoshinori Katsuyama iD, Milena Lama iD, Tomoki Yasui iD, Takayuki Kurokawa iD

Gels · 13.06.2025 · 11 (6) · 453

DOI: 10.3390/gels11060453 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 13.06.2025. Verfasst von Duangkamon Viboonratanasri und 7 weiteren Autor:innen. Beteiligte Einrichtung: Graduate School of Life Science, Hokkaido University, Sapporo 001-0021, Japan. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Japan Society for the Promotion of Science, Co-Creation Core for Soft Materials Aspiring Research and Translation (C3-SMART), Japan Society for the Promotion of Science (JSPS) Program for Forming Japan’s Peak Research Universities (J-PEAKS) “Soft Materials Platform Aspiring the Unique….

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

While carboxymethyl cellulose (CMC)—a biocompatible and water-soluble cellulose derivative—holds promise for biomedical applications, challenges remain in synthesizing CMC-based hydrogels with covalent crosslinking through free radical polymerization without requiring complex, multi-step processes. In this study, we introduce a facile one-pot strategy that combines CMC with acrylamide (AAm) under cryogelation and low-intensity UV irradiation to achieve covalent bonding and a high polymerization yield. The resulting polyacrylamide/carboxymethyl cellulose (PAAm/CMC) porous gels were systematically evaluated for their chemical, physical, thermal, and drug-release properties, with a focus on the effects of AAm concentration and polymerization temperature (frozen vs. room temperature). Notably, the cryogel synthesized with 2.5 M AAm (PC2.5) exhibited significantly enhanced mechanical properties—that is, an 8.4-fold increase in tensile modulus and a 26-fold increase in toughness—compared with the non-cryo gel. Moreover, PC2.5 demonstrated excellent cyclic compression stability in water and phosphate-buffered saline (PBS), with less than 10% reduction in modulus after 100 cycles. These increases in the mechanical properties of PC2.5 are attributed to the formation of macropores with high polymer density and high crosslinking density at the pore walls. PC2.5 also showed slower drug release in PBS and good cytocompatibility. This study presents a simplified and efficient route for fabricating mechanically robust, covalently crosslinked PAAm/CMC cryogels, highlighting their strong potential for biomedical applications in drug delivery systems.

Schlagwörter

Stichwörter der Autor:innen

carboxymethyl cellulosecryogelationdrug deliverypolyacrylamideporoustoughness

Autor:innen und Institutionen

  • Graduate School of Life Science, Hokkaido University, Sapporo 001-0021, Japan.
  • Faculty of Advanced Life Science, Hokkaido University, Sapporo 001-0021, Japan.
  • Faculty of Medicine and Graduate School of Medicine, Hokkaido University, Sapporo 060-8638, Japan.
  • Institute for Chemical Reaction Design and Discovery (WPI-ICReDD), Hokkaido University, Sapporo 001-0021, Japan.

ORCID-Profile: Tsuyoshi Okumura, Mohamad Alaa Terkawi, Yoshinori Katsuyama, Milena Lama, Tomoki Yasui, Takayuki Kurokawa

Förderung

  • Japan Society for the Promotion of Science
  • Co-Creation Core for Soft Materials Aspiring Research and Translation (C3-SMART)
  • Japan Society for the Promotion of Science (JSPS) Program for Forming Japan’s Peak Research Universities (J-PEAKS) “Soft Materials Platform Aspiring the Unique…

Zitieren

APA

Viboonratanasri, D., King, D. R., Okumura, T., Terkawi, M. A., Katsuyama, Y., Lama, M., Yasui, T., & Kurokawa, T. (2025). Porous and Tough Polyacrylamide/Carboxymethyl Cellulose Gels Chemically Crosslinked via Cryo-UV Polymerization for Sustained Drug Release. Gels, 11(6), 453. https://doi.org/10.3390/gels11060453

Vancouver

Viboonratanasri D, King DR, Okumura T, Terkawi MA, Katsuyama Y, Lama M, et al. Porous and Tough Polyacrylamide/Carboxymethyl Cellulose Gels Chemically Crosslinked via Cryo-UV Polymerization for Sustained Drug Release. Gels. 2025;11(6):453. doi:10.3390/gels11060453

BibTeX
@article{Viboonratanasri2025,
  author = {Viboonratanasri, Duangkamon and King, Daniel Rudolf and Okumura, Tsuyoshi and Terkawi, Mohamad Alaa and Katsuyama, Yoshinori and Lama, Milena and Yasui, Tomoki and Kurokawa, Takayuki},
  title = {Porous and Tough Polyacrylamide/Carboxymethyl Cellulose Gels Chemically Crosslinked via Cryo-UV Polymerization for Sustained Drug Release},
  journal = {Gels},
  year = {2025},
  volume = {11},
  number = {6},
  pages = {453},
  doi = {10.3390/gels11060453}
}
Kostenlos starten →