EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Behaviour of Contaflex Soft Contact Lens Material During Hydration

Joseph Towler iD, Markus Zaplachinski, Roberto Montiel iD, Nikhil Murari, Christine Deng, Rimmo Lego, Arwa Fathy, Ahmed Abass iD

Gels · 21.05.2025 · 11 (5) · 376

DOI: 10.3390/gels11050376 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 21.05.2025. Verfasst von Joseph Towler und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Eye and Vision, Institute of Life Course and Medical Sciences, University of Liverpool, Liverpool L7 8TX, UK. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Calgary, Canada, University of Georgia, USA, Western University, Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this study was to quantitatively evaluate the swelling and transparency behaviour of Contaflex soft contact lens materials with varying water-content (38–77%) using high-resolution digital imaging and infrared LiDAR. Contaflex materials with 38%, 55%, 58%, 67% and 77% nominal water-contents, denoted as C38, C55, C58, C67, and C77, were tested. Hydrogel samples (N = 5 per group) were monitored over 24 h in pH 7.1 phosphate-buffered saline. Dimensional changes were assessed via linear and radial expansion factors (LEF and REF), and transparency was tracked during hydration. All groups exhibited rapid initial swelling followed by continued expansion. LEF and REF values increased with water-content; C77 reached LEF and REF values of 1.563 ± 0.093 and 1.536 ± 0.052, while C38 stabilised near 1.201 ± 0.019 and 1.179 ± 0.011, respectively. Refractive index decreased with hydration, from 1.552 in C38 to 1.372 in C77. Power simulations revealed deviations beyond ISO tolerance limits in most materials, particularly those with higher water-content. Transparency changes were consistent with swelling dynamics. These findings support the need for material-specific design adjustments to account for hydration-related dimensional and optical changes in soft contact lenses.

Schlagwörter

Stichwörter der Autor:innen

contact lensdesignhydrationhydrogelmanufacturingmaterialsoft

Autor:innen und Institutionen

  • Department of Eye and Vision, Institute of Life Course and Medical Sciences, University of Liverpool, Liverpool L7 8TX, UK.
  • Department of Materials, Design and Manufacturing Engineering, School of Engineering, University of Liverpool, Liverpool L69 3GH, UK.
  • Department of Biomedical Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada.
  • School of Environmental, Civil, Agricultural, and Mechanical Engineering, University of Georgia, Athens, GA 30602, USA.
  • Department of Chemical, Materials & Biomedical Engineering, College of Engineering, University of Georgia, Athens, GA 30602, USA.
  • Department of Microbiology & Immunology, Schulich School of Medicine & Dentistry, Western University, London, ON N6A 5C1, Canada.

ORCID-Profile: Joseph Towler, Roberto Montiel, Ahmed Abass

Förderung

  • University of Calgary, Canada
  • University of Georgia, USA
  • Western University, Canada
  • Stevens Institute of Technology, USA

Zitieren

APA

Towler, J., Zaplachinski, M., Montiel, R., Murari, N., Deng, C., Lego, R., Fathy, A., & Abass, A. (2025). The Behaviour of Contaflex Soft Contact Lens Material During Hydration. Gels, 11(5), 376. https://doi.org/10.3390/gels11050376

Vancouver

Towler J, Zaplachinski M, Montiel R, Murari N, Deng C, Lego R, et al. The Behaviour of Contaflex Soft Contact Lens Material During Hydration. Gels. 2025;11(5):376. doi:10.3390/gels11050376

BibTeX
@article{Towler2025,
  author = {Towler, Joseph and Zaplachinski, Markus and Montiel, Roberto and Murari, Nikhil and Deng, Christine and Lego, Rimmo and Fathy, Arwa and Abass, Ahmed},
  title = {The Behaviour of Contaflex Soft Contact Lens Material During Hydration},
  journal = {Gels},
  year = {2025},
  volume = {11},
  number = {5},
  pages = {376},
  doi = {10.3390/gels11050376}
}
Kostenlos starten →