3D-Printed Hydrogels from Natural Polymers for Biomedical Applications: Conventional Fabrication Methods, Current Developments, Advantages, and Challenges
Gels · 09.03.2025 · 11 (3) · 192
DOI: 10.3390/gels11030192 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Gels, online erschienen am 09.03.2025. Verfasst von Berk Uysal und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering, Oklahoma State University, 420 Engineering North, Stillwater, OK 74078, USA. Die Arbeit wurde bisher 40-mal zitiert (Crossref) und nennt 189 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Hydrogels are network polymers with high water-bearing capacity resembling the extracellular matrix. Recently, many studies have focused on synthesizing hydrogels from natural sources as they are biocompatible, biodegradable, and readily available. However, the structural complexities of biological tissues and organs limit the use of hydrogels fabricated with conventional methods. Since 3D printing can overcome this barrier, more interest has been drawn toward the 3D printing of hydrogels. This review discusses the structure of hydrogels and their potential biomedical applications with more emphasis on natural hydrogels. There is a discussion on various formulations of alginates, chitosan, gelatin, and hyaluronic acid. Furthermore, we discussed the 3D printing techniques available for hydrogels and their advantages and limitations.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Chemical Engineering, Oklahoma State University, 420 Engineering North, Stillwater, OK 74078, USA.
- Department of Chemistry, New Mexico Institute of Mining and Technology, Lopez Hall 221, Socorro, NM 87801, USA.
- Mathematics, Physical and Natural Sciences Division, University of New Mexico-Gallup, 705 Gurley Ave., Gallup, NM 87301, USA.
ORCID-Profile: Ujith S K Madduma-Bandarage, Sundar Madihally
Zitieren
APA
Uysal, B., Madduma-Bandarage, U. S. K., Jayasinghe, H. G., & Madihally, S. (2025). 3D-Printed Hydrogels from Natural Polymers for Biomedical Applications: Conventional Fabrication Methods, Current Developments, Advantages, and Challenges. Gels, 11(3), 192. https://doi.org/10.3390/gels11030192
Vancouver
Uysal B, Madduma-Bandarage USK, Jayasinghe HG, Madihally S. 3D-Printed Hydrogels from Natural Polymers for Biomedical Applications: Conventional Fabrication Methods, Current Developments, Advantages, and Challenges. Gels. 2025;11(3):192. doi:10.3390/gels11030192
BibTeX
@article{Uysal2025,
author = {Uysal, Berk and Madduma-Bandarage, Ujith S K and Jayasinghe, Hasani G and Madihally, Sundar},
title = {3D-Printed Hydrogels from Natural Polymers for Biomedical Applications: Conventional Fabrication Methods, Current Developments, Advantages, and Challenges},
journal = {Gels},
year = {2025},
volume = {11},
number = {3},
pages = {192},
doi = {10.3390/gels11030192}
}
EUVIMED