EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Characterization of Cannabidiol Gummy Using 3D Printing

Arvind Bagde, Mina Messiha, Mandip Singh iD

Gels · 08.03.2025 · 11 (3) · 189

DOI: 10.3390/gels11030189 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 08.03.2025. Verfasst von Arvind Bagde und 2 weiteren Autor:innen. Beteiligte Einrichtung: Pharmaceutical Sciences Department, Florida A&M University, Tallahassee, FL 32307, USA. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIMHD NIH HHS, NSF-CREST Center for Complex Materials Design for Multidimensional Additive Processing (CoManD), National Institute on Minority Health and Health Disparities of National Institutes of Health.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Oropharyngeal dysphagia and pain are prevalent concerns in the geriatric population. Therefore, this study investigates advances in the development of cannabidiol (CBD) gummies using 3D printing technology and compares them to commercially available molded gummies for pain management. A gelatin-based CBD formulation was prepared and printed using a syringe-based extrusion 3D printer. The formulation’s rheological properties were assessed, and the printed gummies were characterized using a texture analyzer. Drug content was analyzed using HPLC, and in vitro dissolution studies were conducted in phosphate buffer (pH 1.2 and 6.8). Our results demonstrated that the gelatin-based formulation had shear-thinning rheological properties for 3D printing at a temperature of 38.00 °C, filament diameter of 26 mm and flow of 110%. The optimized printing parameters produced gummies with higher elasticity compared to marketed gummies and comparable toughness. Drug content analysis showed 98.14 ± 1.56 and 97.97 ± 2.14% of CBD in 3D-printed and marketed gummies, respectively. Dissolution studies revealed that both gummy types released 100% of the drug within 30 min in both pH 1.2 and 6.8 buffers. Overall, 3D printing enables customizable CBD gummies with optimized release and offer a personalized and patient-friendly alternative to traditional oral forms for geriatric care.

Schlagwörter

Stichwörter der Autor:innen

3D printingCBDdysphagiagelgelatingummy

Autor:innen und Institutionen

  • Pharmaceutical Sciences Department, Florida A&M University, Tallahassee, FL 32307, USA.

ORCID-Profile: Mandip Singh

Förderung

  • NIMHD NIH HHS
  • NSF-CREST Center for Complex Materials Design for Multidimensional Additive Processing (CoManD)
  • National Institute on Minority Health and Health Disparities of National Institutes of Health

Zitieren

APA

Bagde, A., Messiha, M., & Singh, M. (2025). Development and Characterization of Cannabidiol Gummy Using 3D Printing. Gels, 11(3), 189. https://doi.org/10.3390/gels11030189

Vancouver

Bagde A, Messiha M, Singh M. Development and Characterization of Cannabidiol Gummy Using 3D Printing. Gels. 2025;11(3):189. doi:10.3390/gels11030189

BibTeX
@article{Bagde2025,
  author = {Bagde, Arvind and Messiha, Mina and Singh, Mandip},
  title = {Development and Characterization of Cannabidiol Gummy Using 3D Printing},
  journal = {Gels},
  year = {2025},
  volume = {11},
  number = {3},
  pages = {189},
  doi = {10.3390/gels11030189}
}
Kostenlos starten →