Current Status of Bioprinting Using Polymer Hydrogels for the Production of Vascular Grafts
Gels · 26.12.2024 · 11 (1) · 4
DOI: 10.3390/gels11010004 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Gels, online erschienen am 26.12.2024. Verfasst von Jana Matějková und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Technology, Faculty of Biomedical Engineering, Czech Technical University in Prague, 27201 Kladno, Czech Republic. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 156 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Health, Czech Technical University in Prague, Ministry of Health of the Czech Republic.
Abstract (Originalsprache)
Cardiovascular disease is one of the leading causes of death and serious illness in Europe and worldwide. Conventional treatment—replacing the damaged blood vessel with an autologous graft—is not always affordable for the patient, so alternative approaches are being sought. One such approach is patient-specific tissue bioprinting, which allows for precise distribution of cells, material, and biochemical signals. With further developmental support, a functional replacement tissue or vessel can be created. This review provides an overview of the current state of bioprinting for vascular graft manufacturing and summarizes the hydrogels used as bioinks, the material of carriers, and the current methods of fabrication used, especially for vessels smaller than 6 mm, which are the most challenging for cardiovascular replacements. The fabrication methods are divided into several sections—self-supporting grafts based on simple 3D bioprinting and bioprinting of bioinks on scaffolds made of decellularized or nanofibrous material.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biomedical Technology, Faculty of Biomedical Engineering, Czech Technical University in Prague, 27201 Kladno, Czech Republic.
ORCID-Profile: Jana Matějková, Denisa Kaňoková, Roman Matějka
Förderung
- Ministry of Health
- Czech Technical University in Prague
- Ministry of Health of the Czech Republic
- Grant Agency of the Czech Technical University in Prague
Zitieren
APA
Matějková, J., Kaňoková, D., & Matějka, R. (2024). Current Status of Bioprinting Using Polymer Hydrogels for the Production of Vascular Grafts. Gels, 11(1), 4. https://doi.org/10.3390/gels11010004
Vancouver
Matějková J, Kaňoková D, Matějka R. Current Status of Bioprinting Using Polymer Hydrogels for the Production of Vascular Grafts. Gels. 2024;11(1):4. doi:10.3390/gels11010004
BibTeX
@article{Matjkov2024,
author = {Matějková, Jana and Kaňoková, Denisa and Matějka, Roman},
title = {Current Status of Bioprinting Using Polymer Hydrogels for the Production of Vascular Grafts},
journal = {Gels},
year = {2024},
volume = {11},
number = {1},
pages = {4},
doi = {10.3390/gels11010004}
}
EUVIMED