EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Characterization of Ultrasonically Modified Peanut Protein–Guar Gum Composite Emulsion Gels for 3D Printing

Hong-Yan Yan, Shao-Bing Zhang iD

Gels · 14.12.2024 · 10 (12) · 828

DOI: 10.3390/gels10120828 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 14.12.2024. Verfasst von Hong-Yan Yan und 1 weiteren Autor:innen. Beteiligte Einrichtung: College of Food Science and Engineering, Henan University of Technology, Zhengzhou 450001, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to prepare ultrasonically modified peanut protein–guar gum composite emulsion gels for 3D printing. The composition of the composite emulsion gels was determined in single-factor and orthogonal experiments. The results revealed that the optimal composite emulsion gels consisted of 6% peanut protein, 50% oil and 0.2% guar gum. After crushing pretreatment for 45 s, the printing deviation of the composite emulsion gels was reduced to 8.58 ± 0.20%. Moreover, after ultrasonic treatment (200 W for 20 min) of peanut proteins, the obtained composite emulsion gels presented the highest yield stress, hardness and G’ values, as well as a denser and more homogeneous microstructure. After protein ultrasonic modification (200 W or 600 W for 20 min), the printing accuracy and self-supporting properties of the composite emulsion gels for printing complex shapes significantly improved, which was attributed to their stronger textural and rheological properties; however, ultrasonically modified peanut protein–guar gum composite emulsion gels were not suitable for printing products with smooth surfaces.

Schlagwörter

Stichwörter der Autor:innen

3D printingemulsion gelsguar gumpeanut proteinsultrasonic modification

Autor:innen und Institutionen

  • College of Food Science and Engineering, Henan University of Technology, Zhengzhou 450001, China.

ORCID-Profile: Shao-Bing Zhang

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yan, H. Y., & Zhang, S. B. (2024). Preparation and Characterization of Ultrasonically Modified Peanut Protein–Guar Gum Composite Emulsion Gels for 3D Printing. Gels, 10(12), 828. https://doi.org/10.3390/gels10120828

Vancouver

Yan HY, Zhang SB. Preparation and Characterization of Ultrasonically Modified Peanut Protein–Guar Gum Composite Emulsion Gels for 3D Printing. Gels. 2024;10(12):828. doi:10.3390/gels10120828

BibTeX
@article{Yan2024,
  author = {Yan, Hong-Yan and Zhang, Shao-Bing},
  title = {Preparation and Characterization of Ultrasonically Modified Peanut Protein–Guar Gum Composite Emulsion Gels for 3D Printing},
  journal = {Gels},
  year = {2024},
  volume = {10},
  number = {12},
  pages = {828},
  doi = {10.3390/gels10120828}
}
Kostenlos starten →