EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Vitro Investigation of 3D Printed Hydrogel Scaffolds with Electrospun Tidemark Component for Modeling Osteochondral Interface

Victoria Effiong Effanga iD, Dana Akilbekova iD, Fariza Mukasheva iD, Xiao Zhao, Dilhan M Kalyon, Cevat Erisken iD

Gels · 15.11.2024 · 10 (11) · 745

DOI: 10.3390/gels10110745 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 15.11.2024. Verfasst von Victoria Effiong Effanga und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University, 010000 Astana, Kazakhstan. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Osteochondral (OC) tissue plays a crucial role due to its ability to connect bone and cartilage tissues. To address the complexity of structure and functionality at the bone–cartilage interface, relevant to the presence of the tidemark as a critical element at the bone–cartilage boundary, we fabricated graded scaffolds through sequential 3D printing. The scaffold’s bottom layer was based on a gelatin/oxidized alginate mixture enriched with hydroxyapatite (HAp) to create a rougher surface and larger pores to promote osteogenesis. In contrast, the upper layer was engineered to have smaller pores and aimed to promote cartilage tissue formation and mimic the physical properties of the cartilage. An electrospun ε-polycaprolactone (PCL) membrane with micrometer-range pores was incorporated between the layers to replicate the function of tidemark—a barrier to prevent vascularization of cartilage from subchondral bone tissue. In vitro cell studies confirmed the viability of the cells on the layers of the scaffolds and the ability of PCL mesh to prevent cellular migration. The fabricated scaffolds were thoroughly characterized, and their mechanical properties were compared to native OC tissue, demonstrating suitability for OC tissue engineering and graft modeling. The distance of gradient of mineral concentration was found to be 151 µm for grafts and the native OC interface.

Schlagwörter

Stichwörter der Autor:innen

3D printingelectrospinningosteochondraltidemarktissue engineering

Autor:innen und Institutionen

  • Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University, 010000 Astana, Kazakhstan.
  • Department of Chemical Engineering and Material Science, Stevens Institute of Technology, Hoboken, NJ 07030, USA.

ORCID-Profile: Victoria Effiong Effanga, Dana Akilbekova, Fariza Mukasheva, Cevat Erisken

Förderung

  • Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan

Zitieren

APA

Effanga, V. E., Akilbekova, D., Mukasheva, F., Zhao, X., Kalyon, D. M., & Erisken, C. (2024). In Vitro Investigation of 3D Printed Hydrogel Scaffolds with Electrospun Tidemark Component for Modeling Osteochondral Interface. Gels, 10(11), 745. https://doi.org/10.3390/gels10110745

Vancouver

Effanga VE, Akilbekova D, Mukasheva F, Zhao X, Kalyon DM, Erisken C. In Vitro Investigation of 3D Printed Hydrogel Scaffolds with Electrospun Tidemark Component for Modeling Osteochondral Interface. Gels. 2024;10(11):745. doi:10.3390/gels10110745

BibTeX
@article{Effanga2024,
  author = {Effanga, Victoria Effiong and Akilbekova, Dana and Mukasheva, Fariza and Zhao, Xiao and Kalyon, Dilhan M and Erisken, Cevat},
  title = {In Vitro Investigation of 3D Printed Hydrogel Scaffolds with Electrospun Tidemark Component for Modeling Osteochondral Interface},
  journal = {Gels},
  year = {2024},
  volume = {10},
  number = {11},
  pages = {745},
  doi = {10.3390/gels10110745}
}
Kostenlos starten →