Evaluation of Mixing Temperature in the Preparation of Plant-Based Bigels
Gels · 09.11.2024 · 10 (11) · 725
DOI: 10.3390/gels10110725 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gels, online erschienen am 09.11.2024. Verfasst von Marcela Quilaqueo und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Faculty of Engineering and Science, Universidad de La Frontera, Temuco 4811230, Chile. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Nacional de Investigación y Desarrollo, Fondo de Desarrollo Científico SOCHINUT, Fondo de Desarrollo Científico SOCHINUT-Henri Nestlé 2022.
Abstract (Originalsprache)
Understanding gel structures and behavior is a prerequisite for attaining the desired food application characteristics. The mixing temperature is crucial when incorporating thermolabile active compounds into gels. This study evaluated the effect of mixing temperature on the physical and chemical properties of a bigel system prepared using a carnauba wax/canola oil oleogel and Arabic gum hydrogels. The results showed that bigels prepared at lower temperatures (30 and 40 °C) resulted in a solid-like state under crystallization temperature, resulting in matrices with larger hydrogel droplets, softer texture, and lower adhesiveness, spreadability, and solvent binding capacity. In contrast, bigels prepared at higher temperatures (50 and 60 °C), around crystallization temperature but with no solid state, resulted in matrices with smaller hydrogel droplets and higher firmness, adhesiveness, and spreadability. These bigels had a higher apparent viscosity, especially at lower shear rates, and solid-like behavior in the linear viscosity range. During the bigel preparation process, adjusting the mixture temperature had no effect on the samples’ oxidative stability, FTIR spectra, or thermal properties. The results highlighted the importance of hydrogel droplet size on the microstructure of the formed bigels, and smaller droplets could act as effective fillers to reinforce the matrix without making chemical changes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, Faculty of Engineering and Science, Universidad de La Frontera, Temuco 4811230, Chile.
- Scientific and Technological Bioresource Nucleus BIOREN, Universidad de La Frontera, Avenida Francisco Salazar 01145, Temuco 4811230, Chile.
- Biopolymer Research & Engineering Laboratory (BiopREL), School of Nutrition and Dietetics, Faculty of Medicine, Universidad de los Andes, Chile, Monseñor Álvaro del Portillo 12.455, Las Condes 7620086, Chile.
- Centro de Investigación e Innovación Biomédica (CIIB), Universidad de los Andes, Monseñor Álvaro del Portillo 12.455, Las Condes 7620086, Chile.
ORCID-Profile: Marcela Quilaqueo, Mónica Rubilar, Ingrid Contardo
Förderung
- Agencia Nacional de Investigación y Desarrollo
- Fondo de Desarrollo Científico SOCHINUT
- Fondo de Desarrollo Científico SOCHINUT-Henri Nestlé 2022
- Chilean National Agency for Research and Development
Zitieren
APA
Quilaqueo, M., Millao, S., Morales, E., Rubilar, M., & Contardo, I. (2024). Evaluation of Mixing Temperature in the Preparation of Plant-Based Bigels. Gels, 10(11), 725. https://doi.org/10.3390/gels10110725
Vancouver
Quilaqueo M, Millao S, Morales E, Rubilar M, Contardo I. Evaluation of Mixing Temperature in the Preparation of Plant-Based Bigels. Gels. 2024;10(11):725. doi:10.3390/gels10110725
BibTeX
@article{Quilaqueo2024,
author = {Quilaqueo, Marcela and Millao, Sonia and Morales, Eduardo and Rubilar, Mónica and Contardo, Ingrid},
title = {Evaluation of Mixing Temperature in the Preparation of Plant-Based Bigels},
journal = {Gels},
year = {2024},
volume = {10},
number = {11},
pages = {725},
doi = {10.3390/gels10110725}
}
EUVIMED