Development of Personalised Immediate-Release Gel-Based Formulations Using Semi-Solid Extrusion
Gels · 17.10.2024 · 10 (10) · 665
DOI: 10.3390/gels10100665 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gels, online erschienen am 17.10.2024. Verfasst von Morenikeji Aina und 6 weiteren Autor:innen. Beteiligte Einrichtung: RAPSODEE, IMT Mines Albi, CNRS, University of Toulouse, 81013 Albi, France. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agence nationale de la recherche, Occitanie region, Occitanie Region and ANR “Investissements d’Avenir” program.
Abstract (Originalsprache)
Precision in dosing is crucial for optimizing therapeutic outcomes and preventing overdosing, especially in preterm infants. Traditional manual adjustments to adapt the dose often lead to inaccuracies, contamination risks, and reduced precision. To overcome these challenges, semi-solid extrusion 3D printing was used to create personalised gel-based caffeine dosage forms. The hydrogels, made from agar and hydroxypropyl methylcellulose, demonstrated excellent rheological properties, ensuring uniform extrusion and accurate shape retention during and after printing. This gel formulation allowed for precise adjustments of caffeine volume and content tailored to a neonate weighing 1.36 kg, achieving a recovery of 103.46%, well within acceptable limits. Additionally, three production batches confirmed the process’s reproducibility with minimal variability. Forced degradation studies showed that both pure caffeine and caffeine in the gel matrix exhibited similar stability profiles, confirming the drug’s chemical integrity. The printed gel dosage forms also displayed immediate-release characteristics, with over 80% of caffeine released within 45 min, highlighting their suitability for rapid therapeutic action. These findings emphasise the potential of SSE 3DP and gel-based formulations to produce personalised drug delivery systems with high precision, reproducibility, and reliability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- RAPSODEE, IMT Mines Albi, CNRS, University of Toulouse, 81013 Albi, France.
- ICGM, University of Montpellier, CNRS, ENSCM, 34293 Montpellier, France.
- Department of Pharmacy, Nîmes University Hospital, 30029 Nîmes, France.
ORCID-Profile: Morenikeji Aina, Fabien Baillon, Romain Sescousse, Noelia M Sanchez-Ballester, Ian Soulairol, Martial Sauceau
Förderung
- Agence nationale de la recherche
- Occitanie region
- Occitanie Region and ANR “Investissements d’Avenir” program
Zitieren
APA
Aina, M., Baillon, F., Sescousse, R., Sanchez-Ballester, N. M., Begu, S., Soulairol, I., & Sauceau, M. (2024). Development of Personalised Immediate-Release Gel-Based Formulations Using Semi-Solid Extrusion. Gels, 10(10), 665. https://doi.org/10.3390/gels10100665
Vancouver
Aina M, Baillon F, Sescousse R, Sanchez-Ballester NM, Begu S, Soulairol I, et al. Development of Personalised Immediate-Release Gel-Based Formulations Using Semi-Solid Extrusion. Gels. 2024;10(10):665. doi:10.3390/gels10100665
BibTeX
@article{Aina2024,
author = {Aina, Morenikeji and Baillon, Fabien and Sescousse, Romain and Sanchez-Ballester, Noelia M and Begu, Sylvie and Soulairol, Ian and Sauceau, Martial},
title = {Development of Personalised Immediate-Release Gel-Based Formulations Using Semi-Solid Extrusion},
journal = {Gels},
year = {2024},
volume = {10},
number = {10},
pages = {665},
doi = {10.3390/gels10100665}
}
EUVIMED