Insights into the Injectivity and Propagation Behavior of Preformed Particle Gel (PPG) in a Low–Medium-Permeability Reservoir
Gels · 18.07.2024 · 10 (7) · 475
DOI: 10.3390/gels10070475 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gels, online erschienen am 18.07.2024. Verfasst von Hong He und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Petroleum Engineering, Yangtze University, Wuhan 430100, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Research Institute of Exploration and Development of Henan Oilfield.
Abstract (Originalsprache)
Heterogeneous phase combined flooding (HPCF) has been a promising technology used for enhancing oil recovery in heterogeneous mature reservoirs. However, the injectivity and propagation behavior of preformed particle gel (PPG) in low–medium-permeability reservoir porous media is crucial for HPCF treatment in a low–medium-permeability reservoir. Thus, the injectivity and propagation behavior of preformed particle gel in a low–medium-permeability reservoir were systematically studied by conducting a series of sand pack flooding experiments. The matching factor (δ) was defined as the ratio of the average size of PPG particles to the mean size of pore throats and the pressure difference ratio (β) was proposed to characterize the injectivity and propagation ability of PPG. The results show that with the increase in particle size and the decrease in permeability, the resistance factor and residual resistance factor increase. With the increase in the matching factor, the resistance factor and residual resistance factor increase. The higher the resistance factor and residual resistance factor are, the worse the injectivity of particles is. By fitting the relationship curve, PPG injection and propagation standards were established: when the matching coefficient is less than 55 and β is less than 3.4, PPG can be injected; when the matching coefficient is 55–72 and β is 3.4–6.5, PPG injection is difficult; when the matching coefficient is greater than 72 and β is greater than 6.5, PPG cannot be injected Thus, the matching relationship between PPG particle size and reservoir permeability was obtained. This research will provide theoretical support for further EOR research and field application of heterogeneous phase combined flooding.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Petroleum Engineering, Yangtze University, Wuhan 430100, China.
- Key Laboratory of Drilling and Production Engineering for Oil and Gas, Wuhan 430100, China.
- Research Institute of Exploration and Development, Sinopec Henan Oilfield Company, Nanyang 473132, China.
- Henan Provincial Key Laboratory of Enhanced Oil Recovery, Nanyang 473132, China.
- College of Petroleum Engineering, China University of Petroleum (East China), Qingdao 266555, China.
Förderung
- National Natural Science Foundation of China
- Research Institute of Exploration and Development of Henan Oilfield
Zitieren
APA
He, H., Tian, Y., Zhang, L., Li, H., Guo, Y., Liu, Y., & Liu, Y. (2024). Insights into the Injectivity and Propagation Behavior of Preformed Particle Gel (PPG) in a Low–Medium-Permeability Reservoir. Gels, 10(7), 475. https://doi.org/10.3390/gels10070475
Vancouver
He H, Tian Y, Zhang L, Li H, Guo Y, Liu Y, et al. Insights into the Injectivity and Propagation Behavior of Preformed Particle Gel (PPG) in a Low–Medium-Permeability Reservoir. Gels. 2024;10(7):475. doi:10.3390/gels10070475
BibTeX
@article{He2024,
author = {He, Hong and Tian, Yuhang and Zhang, Lianfeng and Li, Hongsheng and Guo, Yan and Liu, Yu and Liu, Yifei},
title = {Insights into the Injectivity and Propagation Behavior of Preformed Particle Gel (PPG) in a Low–Medium-Permeability Reservoir},
journal = {Gels},
year = {2024},
volume = {10},
number = {7},
pages = {475},
doi = {10.3390/gels10070475}
}
EUVIMED