EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of Hydroxyapatite on Gelatin/Oxidized Alginate 3D-Printed Cryogel Scaffolds

Ainur Zhanbassynova, Fariza Mukasheva, Madi Abilev, Dmitriy Berillo iD, Alexander Trifonov iD, Dana Akilbekova iD

Gels · 18.06.2024 · 10 (6) · 406

DOI: 10.3390/gels10060406 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 18.06.2024. Verfasst von Ainur Zhanbassynova und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Astana 010000, Kazakhstan. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This research was funded by the Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan, Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fabrication of scaffolds via 3D printing is a promising approach for tissue engineering. In this study, we combined 3D printing with cryogenic crosslinking to create biocompatible gelatin/oxidized alginate (Gel/OxAlg) scaffolds with large pore sizes, beneficial for bone tissue regeneration. To enhance the osteogenic effects and mechanical properties of these scaffolds, we evaluated the impact of hydroxyapatite (HAp) on the rheological characteristics of the 2.86% (1:1) Gel/OxAlg ink. We investigated the morphological and mechanical properties of scaffolds with low, 5%, and high 10% HAp content, as well as the resulting bio- and osteogenic effects. Scanning electron microscopy revealed a reduction in pore sizes from 160 to 180 µm (HAp-free) and from 120 to 140 µm for both HAp-containing scaffolds. Increased stability and higher Young’s moduli were measured for 5% and 10% HAp (18 and 21 kPa, respectively) compared to 11 kPa for HAp-free constructs. Biological assessments with mesenchymal stem cells indicated excellent cytocompatibility and osteogenic differentiation in all scaffolds, with high degree of mineralization in HAp-containing constructs. Scaffolds with 5% HAp exhibited improved mechanical characteristics and shape fidelity, demonstrated positive osteogenic impact, and enhanced bone tissue formation. Increasing the HAp content to 10% did not show any advantages in osteogenesis, offering a minor increase in mechanical strength at the cost of significantly compromised shape fidelity.

Schlagwörter

Stichwörter der Autor:innen

3D printingbone tissue engineeringcryogelationhydroxyapatitestem cells

Autor:innen und Institutionen

  • Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Astana 010000, Kazakhstan.
  • Department of Chemistry and Biochemical Engineering, Satbayev University, Almaty 050013, Kazakhstan.

ORCID-Profile: Dmitriy Berillo, Alexander Trifonov, Dana Akilbekova

Förderung

  • This research was funded by the Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan
  • Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan

Zitieren

APA

Zhanbassynova, A., Mukasheva, F., Abilev, M., Berillo, D., Trifonov, A., & Akilbekova, D. (2024). Impact of Hydroxyapatite on Gelatin/Oxidized Alginate 3D-Printed Cryogel Scaffolds. Gels, 10(6), 406. https://doi.org/10.3390/gels10060406

Vancouver

Zhanbassynova A, Mukasheva F, Abilev M, Berillo D, Trifonov A, Akilbekova D. Impact of Hydroxyapatite on Gelatin/Oxidized Alginate 3D-Printed Cryogel Scaffolds. Gels. 2024;10(6):406. doi:10.3390/gels10060406

BibTeX
@article{Zhanbassynova2024,
  author = {Zhanbassynova, Ainur and Mukasheva, Fariza and Abilev, Madi and Berillo, Dmitriy and Trifonov, Alexander and Akilbekova, Dana},
  title = {Impact of Hydroxyapatite on Gelatin/Oxidized Alginate 3D-Printed Cryogel Scaffolds},
  journal = {Gels},
  year = {2024},
  volume = {10},
  number = {6},
  pages = {406},
  doi = {10.3390/gels10060406}
}
Kostenlos starten →