Characterization of Quaternary-Ammonium-Based Ionogel Membranes for Application in Proton Exchange Membrane Fuel Cells
Gels · 01.05.2024 · 10 (5) · 308
DOI: 10.3390/gels10050308 ↗Kurz gefasst
Fachartikel in der Zeitschrift Gels, online erschienen am 01.05.2024. Verfasst von Eduardo Iniesta-López und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Faculty of Chemistry, University of Murcia (UM), Campus de Espinardo, E-30100 Murcia, Spain. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia e Innovación, Fundación Séneca - Agencia de Ciencia y Tecnología de la Región de Murcia, Ministry of Science, Innovation, and Universities.
Abstract (Originalsprache)
In recent years, the quest to advance fuel cell technologies has intensified, driven by the imperative to reduce reliance on hydrocarbon-derived fuels and mitigate pollutant emissions. Proton exchange membranes are a critical material of fuel cell technologies. The potential of ionic liquid-based polymer inclusion membranes or ionogels for proton exchange membrane fuel cells (PEMFCs) has recently appeared. Thermal stability, SEM-EDX characterization, NMR and IR characterization, thermogravimetric analysis, ion exchange capacity, and water uptake are key properties of these membranes which need to be investigated. In this work, ionogel based on quaternary ammonium salts, such as [N8,8,8,1+][Cl−], [N8,8,8,1+][Br−], and [N8-10,8-10,8-10,1+][Cl−] in various compositions with poly(vinyl chloride) are extensively studied and characterized based on those key properties. The best properties were obtained when a quaternary ammonium cation was combined with a bromide anion. Finally, ionogels are tested in microbial fuel cells. Microbial fuel cells based on the ionogel reach a maximum of 147 mW/m2, which represents 55% of the reference membrane (Nafion 212). These results indicate that we still have the possibility of improvement through the appropriate selection of the cation and anion of the ionic liquid. Overall, the promise of ionogel membranes as a viable alternative in fuel cell applications has been demonstrated.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, Faculty of Chemistry, University of Murcia (UM), Campus de Espinardo, E-30100 Murcia, Spain.
ORCID-Profile: Eduardo Iniesta-López, Adrián Hernández-Fernández, Yolanda Garrido
Förderung
- Ministerio de Ciencia e Innovación
- Fundación Séneca - Agencia de Ciencia y Tecnología de la Región de Murcia
- Ministry of Science, Innovation, and Universities
- Unión European Next Generation EU/PRTR
- Seneca Foundation Science and Technology Agency of the Region of Murcia
Zitieren
APA
Iniesta-López, E., Hernández-Fernández, A., Martínez-López, Á., Garrido, Y., de Los Ríos, A. P., & Hernández-Fernández, F. J. (2024). Characterization of Quaternary-Ammonium-Based Ionogel Membranes for Application in Proton Exchange Membrane Fuel Cells. Gels, 10(5), 308. https://doi.org/10.3390/gels10050308
Vancouver
Iniesta-López E, Hernández-Fernández A, Martínez-López Á, Garrido Y, de Los Ríos AP, Hernández-Fernández FJ. Characterization of Quaternary-Ammonium-Based Ionogel Membranes for Application in Proton Exchange Membrane Fuel Cells. Gels. 2024;10(5):308. doi:10.3390/gels10050308
BibTeX
@article{IniestaLpez2024,
author = {Iniesta-López, Eduardo and Hernández-Fernández, Adrián and Martínez-López, Ángel and Garrido, Yolanda and de Los Ríos, Antonia Pérez and Hernández-Fernández, Francisco José},
title = {Characterization of Quaternary-Ammonium-Based Ionogel Membranes for Application in Proton Exchange Membrane Fuel Cells},
journal = {Gels},
year = {2024},
volume = {10},
number = {5},
pages = {308},
doi = {10.3390/gels10050308}
}
EUVIMED