EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Extrusion-Based 3D Printing of Photocrosslinkable Chitosan Inks

Ane García-García iD, Leyre Pérez-Álvarez iD, Leire Ruiz-Rubio iD, Asier Larrea-Sebal, Cesar Martin iD, José Luis Vilas-Vilela

Gels · 04.02.2024 · 10 (2) · 126

DOI: 10.3390/gels10020126 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 04.02.2024. Verfasst von Ane García-García und 5 weiteren Autor:innen. Beteiligte Einrichtung: Grupo de Química Macromolecular (LABQUIMAC), Departamento de Química Física, Facultad de Ciencia y Tecnología, Universidad del País Vasco (UPV/EHU), …. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Basque Government, Ministerio de Ciencia e Innovación, Grupos Consolidados.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Photocuring of chitosan has shown great promise in the extrusion-based 3D printing of scaffolds for advanced biomedical and tissue engineering applications. However, the poor mechanical stability of methacrylated chitosan photocuring ink restricts its applicability. The inclusion of co-networks by means of simultaneous polycomplex formation is an effective method by which to solve this drawback, but the formed hydrogel inks are not printable. This work aims to develop new photocurable chitosan inks based on the simultaneous photocrosslinking of methacrylated chitosan (CHIMe) with N,N′-methylenebisacrylamide, polyethylene glycol diacrylate, and acrylic acid to be applied in extrusion 3D printing. Interestingly, the polycomplex co-network corresponding to the acrylic-acid-based ink could be successfully printed by the here-presented simultaneous photocuring strategy. Further, the conversion of photocrosslinking was studied via photo-DSC analyses that revealed a clear dependence on the chemical structure of the employed crosslinking agents (from 40 to ~100%). In addition, the mechanical and rheological properties of the photocured hydrogels were comparatively studied, as well as the printing quality of the extruded scaffolds. The newly developed chitosan photocurable inks demonstrated extrusion printability (squareness ~0.90; uniformity factor ~0.95) and tunable mechanical properties (Young modulus 14–1068 Pa) by means of different crosslinking approaches according to the chemical architecture of the reactive molecules employed. This work shows the great potential of photocrosslinkable chitosan inks.

Schlagwörter

Stichwörter der Autor:innen

extrusion printingmethacrylated chitosanphotocrosslinking

Autor:innen und Institutionen

  • Grupo de Química Macromolecular (LABQUIMAC), Departamento de Química Física, Facultad de Ciencia y Tecnología, Universidad del País Vasco (UPV/EHU), 48940 Leioa, Spain.
  • BCMaterials, Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain.
  • Biofisika Institute (UPV/EHU, CSIC), UPV/EHU Science Park, 48940 Leioa, Spain.
  • Department of Biochemistry and Molecular Biology, Facultad de Ciencia y Tecnología, Universidad del País Vasco UPV/EHU, 48940 Leioa, Spain.
  • Fundación Biofisika Bizkaia, Barrio Sarriena s/n., 48940 Leioa, Spain.

ORCID-Profile: Ane García-García, Leyre Pérez-Álvarez, Leire Ruiz-Rubio, Cesar Martin

Förderung

  • Basque Government
  • Ministerio de Ciencia e Innovación
  • Grupos Consolidados
  • Ministry of Science and Innovation
  • Grupos Consolidados Gobierno Vasco 2021
  • PIF
  • Fundación Biofísica Bizkaia

Zitieren

APA

García-García, A., Pérez-Álvarez, L., Ruiz-Rubio, L., Larrea-Sebal, A., Martin, C., & Vilas-Vilela, J. L. (2024). Extrusion-Based 3D Printing of Photocrosslinkable Chitosan Inks. Gels, 10(2), 126. https://doi.org/10.3390/gels10020126

Vancouver

García-García A, Pérez-Álvarez L, Ruiz-Rubio L, Larrea-Sebal A, Martin C, Vilas-Vilela JL. Extrusion-Based 3D Printing of Photocrosslinkable Chitosan Inks. Gels. 2024;10(2):126. doi:10.3390/gels10020126

BibTeX
@article{GarcaGarca2024,
  author = {García-García, Ane and Pérez-Álvarez, Leyre and Ruiz-Rubio, Leire and Larrea-Sebal, Asier and Martin, Cesar and Vilas-Vilela, José Luis},
  title = {Extrusion-Based 3D Printing of Photocrosslinkable Chitosan Inks},
  journal = {Gels},
  year = {2024},
  volume = {10},
  number = {2},
  pages = {126},
  doi = {10.3390/gels10020126}
}
Kostenlos starten →