EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Sodium Trimetaphosphate-Based PEDOT:PSS Conductive Hydrogels

Madelyn Reynolds, Lindsay M Stoy iD, Jindi Sun iD, Prince Emmanuel Opoku Amponsah, Lin Li iD, Misael Soto iD, Shang Song iD

Gels · 01.02.2024 · 10 (2) · 115

DOI: 10.3390/gels10020115 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Gels, online erschienen am 01.02.2024. Verfasst von Madelyn Reynolds und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, College of Engineering, University of Arizona, Tucson, AZ 85719, USA. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 88 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technology and Research Initiative Fund (TRIF) from the University of Arizona, NASA, NSF.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conductive hydrogels are highly attractive for biomedical applications due to their ability to mimic the electrophysiological environment of biological tissues. Although conducting polymer polythiophene-poly-(3,4-ethylenedioxythiophene) (PEDOT) and polystyrene sulfonate (PSS) alone exhibit high conductivity, the addition of other chemical compositions could further improve the electrical and mechanical properties of PEDOT:PSS, providing a more promising interface with biological tissues. Here we study the effects of incorporating crosslinking additives, such as glycerol and sodium trimetaphosphate (STMP), in developing interpenetrating PEDOT:PSS-based conductive hydrogels. The addition of glycerol at a low concentration maintained the PEDOT:PSS conductivity with enhanced wettability but decreased the mechanical stiffness. Increasing the concentration of STMP allowed sufficient physical crosslinking with PEDOT:PSS, resulting in improved hydrogel conductivity, wettability, and rheological properties without glycerol. The STMP-based PEDOT:PSS conductive hydrogels also exhibited shear-thinning behaviors, which are potentially favorable for extrusion-based 3D bioprinting applications. We demonstrate an interpenetrating conducting polymer hydrogel with tunable electrical and mechanical properties for cellular interactions and future tissue engineering applications.

Schlagwörter

Stichwörter der Autor:innen

conductive hydrogelconductivitycrosslinkingglycerolpolythiophene-poly-(3,4-ethylenedioxythiophene) and polystyrene sulfonate (PEDO…rheologysodium trimetaphosphate (STMP)

Autor:innen und Institutionen

  • Department of Biomedical Engineering, College of Engineering, University of Arizona, Tucson, AZ 85719, USA.
  • Departments of Materials Science and Engineering, Neuroscience GIDP, and BIO5 Institute, University of Arizona, Tucson, AZ 85719, USA.

ORCID-Profile: Lindsay M Stoy, Jindi Sun, Lin Li, Misael Soto, Shang Song

Förderung

  • Technology and Research Initiative Fund (TRIF) from the University of Arizona
  • NASA
  • NSF

Zitieren

APA

Reynolds, M., Stoy, L. M., Sun, J., Opoku Amponsah, P. E., Li, L., Soto, M., & Song, S. (2024). Fabrication of Sodium Trimetaphosphate-Based PEDOT:PSS Conductive Hydrogels. Gels, 10(2), 115. https://doi.org/10.3390/gels10020115

Vancouver

Reynolds M, Stoy LM, Sun J, Opoku Amponsah PE, Li L, Soto M, et al. Fabrication of Sodium Trimetaphosphate-Based PEDOT:PSS Conductive Hydrogels. Gels. 2024;10(2):115. doi:10.3390/gels10020115

BibTeX
@article{Reynolds2024,
  author = {Reynolds, Madelyn and Stoy, Lindsay M and Sun, Jindi and Opoku Amponsah, Prince Emmanuel and Li, Lin and Soto, Misael and Song, Shang},
  title = {Fabrication of Sodium Trimetaphosphate-Based PEDOT:PSS Conductive Hydrogels},
  journal = {Gels},
  year = {2024},
  volume = {10},
  number = {2},
  pages = {115},
  doi = {10.3390/gels10020115}
}
Kostenlos starten →