EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Objective Optimization of Diesel–Ethanol–n-Butanol Ternary Blends: Balancing Performance and Emissions in CI Engines

Ali Allahyari, Behdad Shadidi, Hossein Haji Agha Alizade, Maryam Hajjami

Fuels · 19.11.2026 · 7 (4) · 87

DOI: 10.3390/fuels7040087 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fuels, online erschienen am 19.11.2026. Verfasst von Ali Allahyari und 3 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bu-Ali Sina University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluates the performance and emissions of a diesel engine fueled with diesel/ethanol/n-butanol blends and identifies optimal operating conditions using multi-objective optimization. Response Surface Methodology based on a Central Composite Design was applied to model the interactions between ethanol (0–10% v/v), n-butanol (0–12% v/v), and engine speed (2800–3300 rpm). Analysis of variance (ANOVA) indicated that the developed regression models for the eight evaluated responses (power, torque, volumetric fuel consumption, brake-specific fuel consumption, NOx, UHC, CO, and CO2) were statistically significant within the 95% to 99% confidence levels (p < 0.05 to p < 0.0001). While ethanol’s latent heat of vaporization suppressed thermal NOx formation by cooling the in-cylinder charge, it simultaneously increased the risk of localized flame quenching and unburned emissions. To mitigate this thermal conflict, n-butanol was incorporated as a phase stabilizer and a thermal buffer. Furthermore, the wide boiling point disparity among the ternary constituents is discussed as a plausible thermodynamic basis for secondary micro-explosion, potentially facilitating droplet breakup despite the lower heating values of the alcohols. Utilizing Derringer’s desirability function within the tested factor ranges, a model-predicted optimal operating condition was identified at 9.52% ethanol and 2.98% n-butanol at 2883.33 rpm. At this model-predicted state, the regression models estimate a brake torque of 17.450 N·m, a brake power of 5.288 kW (aligning within 0.36% with the kinematic value of 5.269 kW via Pb = 2 π N τ/60000), and an analytically derived BSFC of 303.14 g/kWh, alongside predicted exhaust concentrations of 248.58 ppm for NOx, 14.95 ppm for UHC, 0.745% for CO, and 3.47% for CO2. Because this optimum is derived statistically from the fitted response surfaces without an independent confirmation experiment, these values represent model-based predictions subject to polynomial extrapolation and blend-density measurement uncertainties.

Förderung

  • Bu-Ali Sina University

Zitieren

APA

Allahyari, A., Shadidi, B., Alizade, H. H. A., & Hajjami, M. (2026). Multi-Objective Optimization of Diesel–Ethanol–n-Butanol Ternary Blends: Balancing Performance and Emissions in CI Engines. Fuels, 7(4), 87. https://doi.org/10.3390/fuels7040087

Vancouver

Allahyari A, Shadidi B, Alizade HHA, Hajjami M. Multi-Objective Optimization of Diesel–Ethanol–n-Butanol Ternary Blends: Balancing Performance and Emissions in CI Engines. Fuels. 2026;7(4):87. doi:10.3390/fuels7040087

BibTeX
@article{Allahyari2026,
  author = {Allahyari, Ali and Shadidi, Behdad and Alizade, Hossein Haji Agha and Hajjami, Maryam},
  title = {Multi-Objective Optimization of Diesel–Ethanol–n-Butanol Ternary Blends: Balancing Performance and Emissions in CI Engines},
  journal = {Fuels},
  year = {2026},
  volume = {7},
  number = {4},
  pages = {87},
  doi = {10.3390/fuels7040087}
}
Kostenlos starten →