EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Deciphering Dismemberment Cuts: Statistical Relationships Between Incomplete Kerf Morphology and Saw Class Characteristics

Stephanie J. Cole, Heather M. Garvin

Forensic Sciences · 01.11.2025 · 5 (4) · 57

DOI: 10.3390/forensicsci5040057 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Forensic Sciences, online erschienen am 01.11.2025. Verfasst von Stephanie J. Cole und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Institute of Justice, Office of Justice Programs, U.S. Department of Justice.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background/Objectives: Incomplete cut marks produced during dismemberment are often interpreted as indicative of saw class characteristics. However, empirical validation of these associations remains limited, with prior studies examining six or fewer saws. Considering the wide variety of saws available, it is critical to assess the reliability of reported relationships between kerf features and saw classification using a larger sample, particularly in light of the serious legal consequences of erroneous conclusions. This study examines the statistical relationships between five incomplete cut traits—kerf profile shape (KPS), kerf length shape (KLS), floor dip (FD), kerf flare (KF), and floor striae (FS)—and saw class characteristics, including tooth set, tooth shape, teeth-per-inch, power, handle orientation, and cut direction.

Methods

Kerf features were scored on a sample of 472 incomplete cuts made with 34 power and hand saws.

Results

In reciprocating saws, W-shaped KPS was exclusively associated with crosscut, alternating saws (100%; p < 0.001), with hourglass-shaped KLS also primarily made by alternating sets (95.6%). Necked KLS was linked to wavy sets (76.8%; p < 0.001). FD, though rare, could be correctly assigned to teeth-per-inch groups (86.4%), and was also predominantly associated with alternating saws (90.9%; p < 0.001). Undulating FS were indicative of alternating saws with less than 20 teeth-per-inch (100%, p < 0.001). In contrast, KF showed no strong relationship with saw class characteristics, including handle side.

Conclusions

The results of this large-scale analysis support most reported relationships in the saw mark literature but challenge assumptions that KF reliably indicates handle orientation or cut direction, suggesting instead that its location may reflect sawyer technique.

Förderung

  • National Institute of Justice, Office of Justice Programs, U.S. Department of Justice

Zitieren

APA

Cole, S. J., & Garvin, H. M. (2025). Deciphering Dismemberment Cuts: Statistical Relationships Between Incomplete Kerf Morphology and Saw Class Characteristics. Forensic Sciences, 5(4), 57. https://doi.org/10.3390/forensicsci5040057

Vancouver

Cole SJ, Garvin HM. Deciphering Dismemberment Cuts: Statistical Relationships Between Incomplete Kerf Morphology and Saw Class Characteristics. Forensic Sciences. 2025;5(4):57. doi:10.3390/forensicsci5040057

BibTeX
@article{Cole2025,
  author = {Cole, Stephanie J. and Garvin, Heather M.},
  title = {Deciphering Dismemberment Cuts: Statistical Relationships Between Incomplete Kerf Morphology and Saw Class Characteristics},
  journal = {Forensic Sciences},
  year = {2025},
  volume = {5},
  number = {4},
  pages = {57},
  doi = {10.3390/forensicsci5040057}
}
Kostenlos starten →