EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Three-Dimensional Numerical Analysis of Temperature Uniformity in Far-Infrared Assisted Hot Air Drying: Effects of Airflow Configuration and Drying Strategy

Yongsheng Pei, Jian Kong, Chunfang Song, Zhenfeng Li, Benying Liu, Wanxiu Xu

Foods · 12.11.2026 · 15 (22) · 4059

DOI: 10.3390/foods15224059 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Foods, online erschienen am 12.11.2026. Verfasst von Yongsheng Pei und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangsu Province Industry Academic Research Project, Open Project of Yunnan Provincial Key Laboratory of Tea Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Achieving uniform moisture removal remains challenging because heat and mass transfer within drying systems are strongly affected by spatial variations in temperature and airflow. In this study, a three-dimensional model coupling airflow, heat transfer, infrared radiation, and moisture transport was developed in COMSOL Multiphysics and compared with experimental measurements for far-infrared assisted hot air (FIR-HA), hot air (HA), and far-infrared (FIR) drying. Coefficients of determination (R2) exceeded 0.985 for moisture content and 0.913 for temperature. Temperature distributions corresponded closely to moisture migration. Maximum differences in regional average temperature were 28.27, 20.63, and 29.63 °C under FIR-HA, HA, and FIR, respectively, with corresponding moisture differences of 5.2%, 4.8%, and 6.5% wet basis (w.b.), respectively. FIR-HA shortened drying time by at least 44% relative to HA and at least 36% relative to FIR. Nine airflow configurations were evaluated under FIR-HA drying by combining three inlet configurations (vertical, right horizontal, and back horizontal) with three outlet configurations (left, center, and bilateral symmetry). The back horizontal inlet with left outlet yielded the lowest predicted COVd (surrounding-air temperature) of 0.0060, a peak \({\overline{COV}}_{\text{s}} \)} (mean within-sample temperature) of 0.0184 across the three samples, and a peak COVs1 (within-sample temperature) of 0.0115. The proposed three-dimensional coupled model provides a quantitative framework for elucidating the relationship between airflow configuration, thermal distribution, and temperature uniformity, thereby supporting the design and optimization of drying systems for more homogeneous dehydration of rice grains.

Förderung

  • Jiangsu Province Industry Academic Research Project
  • Open Project of Yunnan Provincial Key Laboratory of Tea Science

Zitieren

APA

Pei, Y., Kong, J., Song, C., Li, Z., Liu, B., & Xu, W. (2026). Three-Dimensional Numerical Analysis of Temperature Uniformity in Far-Infrared Assisted Hot Air Drying: Effects of Airflow Configuration and Drying Strategy. Foods, 15(22), 4059. https://doi.org/10.3390/foods15224059

Vancouver

Pei Y, Kong J, Song C, Li Z, Liu B, Xu W. Three-Dimensional Numerical Analysis of Temperature Uniformity in Far-Infrared Assisted Hot Air Drying: Effects of Airflow Configuration and Drying Strategy. Foods. 2026;15(22):4059. doi:10.3390/foods15224059

BibTeX
@article{Pei2026,
  author = {Pei, Yongsheng and Kong, Jian and Song, Chunfang and Li, Zhenfeng and Liu, Benying and Xu, Wanxiu},
  title = {Three-Dimensional Numerical Analysis of Temperature Uniformity in Far-Infrared Assisted Hot Air Drying: Effects of Airflow Configuration and Drying Strategy},
  journal = {Foods},
  year = {2026},
  volume = {15},
  number = {22},
  pages = {4059},
  doi = {10.3390/foods15224059}
}
Kostenlos starten →