EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rheological Characterization of a Thixotropic Semisolid Slurry by Means of Numerical Simulations of Squeeze-Flow Experiments

Georgios C. Florides, Georgios C. Georgiou, Michael Modigell, Eugenio José Zoqui

Fluids · 31.01.2024 · 9 (2) · 36

DOI: 10.3390/fluids9020036 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fluids, online erschienen am 31.01.2024. Verfasst von Georgios C. Florides und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We propose a methodology for the rheological characterization of a semisolid metal slurry using experimental squeeze-flow data. The slurry is modeled as a structural thixotropic viscoplastic material, obeying the regularized Herschel–Bulkley constitutive equation. All rheological parameters are assumed to vary with the structure parameter that is governed by first-order kinetics accounting for the material structure breakdown and build-up. The squeeze flow is simulated using finite elements in a Lagrangian framework. The evolution of the sample height has been studied for wide ranges of the Bingham and Reynolds numbers, the power-law exponent as well as the kinetics parameters of the structure parameter. Systematic comparisons have been carried out with available experimental data on a semisolid aluminum alloy (A356), where the sample is compressed from its top side under a specified strain of 80% at a temperature of 582 °C, while the bottom side remains fixed. Excellent agreement with the experimental data could be achieved provided that at the initial instances (up to 0.01 s) of the experiment, the applied load is much higher than the nominal experimental load and that the yield stress and the power-law exponent vary linearly with the structure parameter. The first assumption implies that a different model, such as an elastoviscoplastic one, needs to be employed during the initial stages of the experiment. As for the second one, the evolution of the sample height can be reproduced allowing the yield stress to vary from 0 (no structure) to a maximum nominal value (full structure) and the power-law exponent from 0.2 to 1.4, i.e., from the shear-thinning to the shear-thickening regime. These variations are consistent with the internal microstructure variation pattern known to be exhibited by semisolid slurries.

Zitieren

APA

Florides, G. C., Georgiou, G. C., Modigell, M., & Zoqui, E. J. (2024). Rheological Characterization of a Thixotropic Semisolid Slurry by Means of Numerical Simulations of Squeeze-Flow Experiments. Fluids, 9(2), 36. https://doi.org/10.3390/fluids9020036

Vancouver

Florides GC, Georgiou GC, Modigell M, Zoqui EJ. Rheological Characterization of a Thixotropic Semisolid Slurry by Means of Numerical Simulations of Squeeze-Flow Experiments. Fluids. 2024;9(2):36. doi:10.3390/fluids9020036

BibTeX
@article{Florides2024,
  author = {Florides, Georgios C. and Georgiou, Georgios C. and Modigell, Michael and Zoqui, Eugenio José},
  title = {Rheological Characterization of a Thixotropic Semisolid Slurry by Means of Numerical Simulations of Squeeze-Flow Experiments},
  journal = {Fluids},
  year = {2024},
  volume = {9},
  number = {2},
  pages = {36},
  doi = {10.3390/fluids9020036}
}
Kostenlos starten →