EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Parametric Investigation of Methanol Spray Combustion Under Direct-Injection Conditions

Kirtan Aryal, Guanxiong Zhai, Ruiyuan Cao, Yijun Lin, Shijie Xu, Kar Mun Pang, Cheng Wang, Guan Heng Yeoh, Qing Nian Chan

Fluids · 17.08.2026 · 11 (8) · 203

DOI: 10.3390/fluids11080203 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fluids, online erschienen am 17.08.2026. Verfasst von Kirtan Aryal und 8 weiteren Autor:innen. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Government Research Training Program Scholarship.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a systematic mapping of methanol spray autoignition, lift-off, and flame development across an engine-relevant range of ambient temperatures (1000–1200 K), injection pressures (70–130 MPa), and O2 concentrations (21–15 vol.%), using a single fixed injector and optical configuration. In addition, the study reports a dual-fuel strategy to address the low-temperature instability challenges highlighted by the mapping. Within this dataset, ignition delay increases with a lower ambient temperature, reduced injection pressure, or a lower O2 concentration, while the lift-off length increases with a lower temperature and higher injection pressure. Schlieren imaging consistently captures ignition in the mid-axial region of the jet, softening of spray-head gradients before high-temperature ignition, and occasional upstream ignition sites during the diffusion-controlled phase that affect the flame base position. At the lowest tested temperature of 1000 K, methanol autoignites over a wide ignition-delay range (±1.33 ms), with combustion occurring outside the chamber’s field of view. The corresponding heat-release profile cannot be interpreted conclusively under the current test configuration. Introducing a pilot jet at this condition enables methanol to ignite shortly after the start of injection over a much narrower range (∼±0.10 ms). The resulting combustion event remains within the field of view and occurs much closer to the nozzle compared with its autoignition counterpart.

Förderung

  • Australian Government Research Training Program Scholarship

Zitieren

APA

Aryal, K., Zhai, G., Cao, R., Lin, Y., Xu, S., Pang, K. M., Wang, C., Yeoh, G. H., & Chan, Q. N. (2026). Parametric Investigation of Methanol Spray Combustion Under Direct-Injection Conditions. Fluids, 11(8), 203. https://doi.org/10.3390/fluids11080203

Vancouver

Aryal K, Zhai G, Cao R, Lin Y, Xu S, Pang KM, et al. Parametric Investigation of Methanol Spray Combustion Under Direct-Injection Conditions. Fluids. 2026;11(8):203. doi:10.3390/fluids11080203

BibTeX
@article{Aryal2026,
  author = {Aryal, Kirtan and Zhai, Guanxiong and Cao, Ruiyuan and Lin, Yijun and Xu, Shijie and Pang, Kar Mun and Wang, Cheng and Yeoh, Guan Heng and Chan, Qing Nian},
  title = {Parametric Investigation of Methanol Spray Combustion Under Direct-Injection Conditions},
  journal = {Fluids},
  year = {2026},
  volume = {11},
  number = {8},
  pages = {203},
  doi = {10.3390/fluids11080203}
}
Kostenlos starten →