EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Friction Drag Characteristics of Non-Newtonian Weighted Fracturing Fluids in Pipe Flows

Jianxin Peng, Liwei Wang, Xin Qiao, Ju Liu, Sixin Li, Wen Zhang, Yanyan Feng, Zhanying Zheng, Yu Zhou

Fluids · 17.04.2026 · 11 (4) · 101

DOI: 10.3390/fluids11040101 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fluids, online erschienen am 17.04.2026. Verfasst von Jianxin Peng und 8 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Institute of Petroleum Exploration and Development, National Natural Science Foundation of China, Ningbo Key Laboratory of Advanced Manufacturing Simulation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Non-Newtonian weighted fracturing fluids are used to carry out hydraulic fracturing operations into the deep and ultra-deep earth for oil and gas extraction, though their flow and friction drag characteristics are largely unknown. This study aims to understand the abovementioned characteristics. An engineering-oriented cost-effective numerical scheme is deployed, incorporating LES with a generalized Newtonian fluid constitutive equation, for predicting the non-Newtonian pipe flow and friction drag coefficient Cf. The weighted fracturing fluid is described as a power-law fluid, i.e., viscosity μ(γ˙)=Kγ˙n−1, where both K and n are coefficients related to fluid rheology, and γ˙ is the shear rate. The influences of fluid density ρ, mean velocity U and pipe diameter D, as well as K and n on Cf were documented and compared with a water pipe flow. It was found that Cf = f1 (K, n, ρ, U, D) may be reduced to Cf = f2 (Reg), where the scaling factor Reg = ρU2−nDn/(K8n−1) is the generalized Reynolds number. This scaling law can reasonably well predict the friction drag variation in the pipe flow of non-Newtonian weighted fracturing fluids throughout a range of interests and engineering applications.

Förderung

  • Research Institute of Petroleum Exploration and Development
  • National Natural Science Foundation of China
  • Ningbo Key Laboratory of Advanced Manufacturing Simulation

Zitieren

APA

Peng, J., Wang, L., Qiao, X., Liu, J., Li, S., Zhang, W., Feng, Y., Zheng, Z., & Zhou, Y. (2026). Friction Drag Characteristics of Non-Newtonian Weighted Fracturing Fluids in Pipe Flows. Fluids, 11(4), 101. https://doi.org/10.3390/fluids11040101

Vancouver

Peng J, Wang L, Qiao X, Liu J, Li S, Zhang W, et al. Friction Drag Characteristics of Non-Newtonian Weighted Fracturing Fluids in Pipe Flows. Fluids. 2026;11(4):101. doi:10.3390/fluids11040101

BibTeX
@article{Peng2026,
  author = {Peng, Jianxin and Wang, Liwei and Qiao, Xin and Liu, Ju and Li, Sixin and Zhang, Wen and Feng, Yanyan and Zheng, Zhanying and Zhou, Yu},
  title = {Friction Drag Characteristics of Non-Newtonian Weighted Fracturing Fluids in Pipe Flows},
  journal = {Fluids},
  year = {2026},
  volume = {11},
  number = {4},
  pages = {101},
  doi = {10.3390/fluids11040101}
}
Kostenlos starten →